Yamaha MG10 Mischpult

- 10-Kanal Mischpult Konsole
- Max. 4 Mikrofon- / 10 Line-Eingänge (4 mono + 3 stereo)
- 1 Stereo Bus
- 1 AUX (incl. FX)
- “D-PRE” Mikrofonvorverstärker mit invertierter Darlington Schaltung
- 1-Knopf Kompressoren
- PAD Schalter bei Mono-Eingängen
- +48V Phantomspeisung
- XLR Symmetrische Ausgänge
- Metallgehäuse
- Maße (B×H×T): 244 mm x 71 mm x 294 mm
- Gewicht: 1.9 kg

Phantom power: +48 V
Mono[MIC/LINE]: 4
Stereo[LINE]: 3
Stereo Out: 2
Monitor Out: 1
Phones: 1
AUX Send: 1
Bus: Stereo: 1, AUX[FX]: 1

PAD: 26 dB (Mono)
HPF: 80 Hz, 12 dB/oct (Mono)
COMP: 1-knob compressor Threshold: +22 dBu to -8 dBu, Ratio: 1:1 to 4:1, Output level: 0 dB to 7 dB, Attack time: approx. 25 msec, Release time: approx. 300 msec

EQ High: Gain: +15 dB/-15 dB, Frequency: 10 kHz shelving
EQ Mid: Gain: +15 dB/-15 dB, Frequency: 2.5kHz peaking
EQ Low: Gain: +15 dB/-15 dB, Frequency: 100 Hz shelving
Peak LED: LED turns on when post EQ signal reaches 3 dB below clipping
Level Meter: 2 x 7 -segment LED meter [PEAK, +10, +6, 0, -6, -10, -20 dB]

Total harmonic distortion: 0.02 % @ +14dBu (20 Hz to 20kHz), GAIN knob: Min, 0.003 % @ +24dBu (1kHz), GAIN knob: Min
Frequency response: +0.5 dB/-1.0 dB (20 Hz to 48 kHz) , refer to the nominal output level @ 1 kHz, GAIN knob: Min
Equivalent input noise: -128 dBu (Mono Input Channel, Rs: 150O, GAIN knob: Max)
Residual output noise: -102 dBu (STEREO OUT, STEREO LEVEL knob: Min)
Crosstalk: -83 dB

Power requirements: PA-10 (AC 38 VCT, 0.62A, Cable length = 3.6 m) or equivalent recommended by Yamaha
Power consumption: 22,9 W

Maße: 244 mm x 71 mm x 294 mm
Gewicht: 1,9 kg

Zubehör: Inklusive - AC Adaptor, Owner’s Manual, Technical Specifications, Optional Accessory: Mic Stand Adaptor BMS-10A
Others: Operating Temperature: 0 to +40°C