1.ESP-M1
2) serial to WiFi
3) wireless transmission
4) long-range ultra-low power consumption
5) high temperature, up to 125 ℃
6) fully compatible with ESP8266, the esp8266 source code can be used for esp8285
SOC Features
Built-in Tensilica L106 ultra-low power 32-bit microprocessor, clocked at 80MHz and 160MHz support RTOS
Built-in TCP / IP protocol stack
Built-in 1 channel 10 bit precision ADC
Peripheral Interface HSPI, UART, I2C, I2S, IR Remote Control, PWM, GPIO
The deep sleep hold current is 10uA and the shutdown current is less than 5uA
Wake up within 2 ms, connect and pass the packet
Standby power consumption less than 1.0mW (DTIM3)
Wi-Fi features
Supports 802.11 b / g / n / e / i
Support Station, SoftAP, SoftAP + STA mode
Support for Wi-Fi Direct (P2P)
Supports CCMP (CBC-MAC, counter mode), TKIP (MIC, RC4), WAPI (SMS4), WEP (RC4), CRC hardware acceleration
P2P discovery, P2P GO mode / GC mode and P2P power management
WPA / PA2 PSK and WPS
802.11 i security features: pre-authentication and TSN
Supports 802.11n (2.4 GHz)
802.1h / RFC1042 frame encapsulation
Seamless roaming support
Support AT remote upgrade and cloud OTA upgrade
Support for Smart Config features (including Android and iOS devices)
Module peripherals
2xUART
1xADC
1xEn
1x wakeup pin
1xHSPI
1xI2C
1xI2S
Up to 11xGPIOs
4M bytes of SPI Flash
Operating temperature range: -40 ℃ -85 ℃
IO max output current is 12mA
NRST pin active low, EN enable pin active high RXD to MCU’s TXD, TXD to MCU’S RXD
Application
Household appliances
Smart socket, intelligent light
Baby monitor
Sensor Networks
Security ID tag
Wireless positioning system beacon
Home automation
Mesh network
IP camera
Can wear electronic products
Wireless location awareness
2.ESP-M2
Ultra-small size;
Support serial to WiFi;
Wireless transparent transmission;
Long distance transmission with ultra-low power;
Support outboard antenna;
Bearing high temperature to 125 ℃, compared to the 85℃ for ESP8266.
1) size is ultra-small
2) serial to WiFi
3) wireless transmission
4) long-range ultra-low power consumption
5) high temperature, up to 125 ℃
6) fully compatible with ESP8266, the esp8266 source code can be used for esp8285
SOC Features
Built-in Tensilica L106 ultra-low power 32-bit microprocessor, clocked at 80MHz and 160MHz support RTOS
Built-in TCP / IP protocol stack
Built-in 1 channel 10 bit precision ADC
Peripheral Interface HSPI, UART, I2C, I2S, IR Remote Control, PWM, GPIO
The deep sleep hold current is 10uA and the shutdown current is less than 5uA
Wake up within 2 ms, connect and pass the packet
Standby power consumption less than 1.0mW (DTIM3)
Wi-Fi features
Supports 802.11 b / g / n / e / i
Support Station, SoftAP, SoftAP + STA mode
Support for Wi-Fi Direct (P2P)
Supports CCMP (CBC-MAC, counter mode), TKIP (MIC, RC4), WAPI (SMS4), WEP (RC4), CRC hardware acceleration
P2P discovery, P2P GO mode / GC mode and P2P power management
WPA / PA2 PSK and WPS
802.11 i security features: pre-authentication and TSN
Supports 802.11n (2.4 GHz)
802.1h / RFC1042 frame encapsulation
Seamless roaming support
Support AT remote upgrade and cloud OTA upgrade
Support for Smart Config features (including Android and iOS devices)
Module peripherals
2xUART
1xADC
1xEn
1x wakeup pin
1xHSPI
1xI2C
1xI2S
Up to 11xGPIOs
4M bytes of SPI Flash
Operating temperature range: -40 ℃ -85 ℃
Module size: 12.3mm×20mm
Note:
Power supply oltage is DC 3.3V
IO max output current is 12mA
NRST pin active low, EN enable pin active high RXD to MCU’s TXD, TXD to MCU’S RXD
Application
Household appliances
Smart socket, intelligent light
Baby monitor
Sensor Networks
Security ID tag
Wireless positioning system beacon
Home automation
Mesh network
IP camera
Can wear electronic products
Wireless location awareness
Industrial Wireless Control
Package Included:
We only accept payment through Paypal.
Items will go to post within 1-2 business days after payment confirmed.
If you can't receive the product within 2 months (60 days), please contact with us,we promise to payback 100% of your money.
We ensure our products work normally before post.If the products is broken before arrival to you,all you should do is taking a photo to show us our broken product.We promise to payback 100% of your money.
1. We ship to Worldwide.
2. We only ship to confirmed PAYPAL address; your PAYPAL address must match your Shipping address.
3. Any non-received items caused by invalid address registered on PayPal are not in our full refund or replacement policy. Shipping fee has including the local handing and packaging fee.
4. All the items will be shipping within 1-2 working days after receiving the payment, except some holidays.
5. We will not be responsible for any custom delay or tax, because transit time is highly depended and provided by postal Service.
6. If you have any problem, please contact us via message, we will reply message within 1-2 working days, please wait for patient.