Description
This Radio Amplifier Board for RA30H4047M RA60H4047M ectmitsubishi's
product. And also support some produce of Toshiba.
It is an upgraded version, increasing the input of SMA seat, power indicator
light and Transmit lights .
Technical Parameters:
Input: 1 - 5W
Output: 10 - 70W (depending on the module)
Input voltage: DC 10 - 13.8V
Frequency: 130Mhz-l70Mhz 400Mhz-470Mhz (depending on the module)
Dimensions: 94*50*1.6MM
Installation and debugging methods:
Before installation, prepare a heat sink with an area larger than the PCB board, and it is recommended to use a thickness of over 25MM
Note: there is a Plug-resistor not weldled, if you use M or S series amplifier module ,yau should remove the plug-resistor R6. if you RA series amplifier module, you should seld the plug resistor.
Note:This is Manutal:pan.baidu.com/s/129Y2
Installation and debugging methods:
Before installation, prepare a heat sink with an area larger than the PCB board, and it is recommended to use a thickness of over 25MM
Package:
1x
Radio Amplifier Board(
not including any RA , M, SU module
)