Instructions to apply decal/Sticker

Before applying please make surface is clean , we typically will wipe surface with 50% isopropyl alcohol and 

wipe dry with a clean dry microfiber towel.

1. Lay decal face down and on flat surface 

2.Slowly remove backing paper at a 180 degree angle,make sure the decal is sticking to 

the translucent Tape side.

3.Apply to a clean,non-porous surface.

4.Using an object with a hard flat edge(Squeegee is recommended but some have used credit cards),

press the translucent transfer tape firmly,concentrating on the vinyl areas,working from the center of the decal outward.

5.Carefully remove the translucent transfer tape from the decal at a 180 degree angle,making sure the vinyl decal adheres 

to the surface being applied to.

6. After removing all of the translucent transfer tape you may need to press down decal to ensure it is flat against 

surface being applied to.

7. If placed on vehicle glass or body panel please allow 24-48 hours for adhesive to cure before washing so that decal 

adhere properly .