Ving Tools Blade Holder for Roland Vinyl Cutter, 46.5mm Length, OEM

Blade Holder for Roland vinyl cutter, 46.5mm Length, OEM
Brand new blade holder, aluminum alloy material, good quality and no deformation!

Description:
• Adopted imported high-quality aluminum alloy and imported resin material, and produced by  elaborate machines;
• High precision, durable and extra long life;
• High quality copper bearing, through precision grinding, not easy to wear during use.
 

Specification:
• Diameter(Clamp): 11.5mm
• Diameter(Blade): 2mm
• Length(Clamp to down): 25mm
• Overall Length: 46.5mm

Details:


Used for:
This blade holder fits roland cutters / plotters blade, diameter 2mm.

High quality copper bearing, through precision grinding, inner race is thicker than ordinary blade holder bearing, high wear resistance and not easy to make the blade concentric circles deviation or knife jumping and other adverse circumstances.	Poor quality copper bearing, inner race is too thick, easy to wear, prevents the blade from working normally, unevenly pressing letters, rotten angle, knife jumping and other adverse circumstances.

Note:

• Do not extend the knife point too long, the extended length should be within 0.5 mm. 

• When cutting small letters, you can extend the knife point longer to avoid carved strokes being took away by blade holder on self-adhesive tape. 

• If there is something wrong with blade holder, try to drop some motor oil in the bearings, and then you can insert the blade and rotate to lubricate. If you still can not solve the problem, you may consider replacing a new knife holder.

Using Guide:

• It works perfect if cutting blades stretch out not too long but within 0.5mm.

• When cutting small letters, cutting blade could stretch out a little bit longer.

• Dropping oil on the bearing inside the blade holder is a good way of maintenance.