Specs:-


This is an amazing one handed saber, designed to be light weight and durable. Fantastic for stunts, tricks and shows.



Blade Specs-

· Blade rating– Mid-grade Polycarbonate blade, Standard combat and sparing capable. (Not rated for extreme combat)

· Blade Tip – Slightly frosted pitted tip glued in place.

· Blade Base – Clear base cap glued in place.

· Blade Length – 32 Inches long. 

· Blade Fitting– Blade slides 2 Inches inside the hilt.

· Blade Width – 24mm.

· Removable Blade – Untighten locking nut in rear of handle.

· Removable Blade – Interchangeable with other Saber blades.



Hilt Specs-

· Hilt Length –  About 9 Inches long. (may vary slightly as handmade)

· Hilt Width – Main body 32mm wide Aluminium, 35mm wide brushed black plastic detailing riveted in place.

· LED – Pre-coloured bespoke High Powered LED. (Not 100% visible in direct sunlight)

· Blade Button – Independent blade button. When turned on the button will lock in a low profile position.

· Power – Saber runs on 4 x AAA batteries in the base of the handle.

· Battery Life – over 4 hours of use.



Info:-

 All our ForceSabers are bespoke custom handmade to order. They are all hand cut and sanded to ensure smooth safe edges, As the ForceSaber is 100% custom handmade there are normally slight cosmetic scratches or imperfections on the handle or blade, on occasion the raw materials may also come with imperfections or marks but this is only noticeable upon extreme close-up, when being used it will have no effect on the look or use of the item. This model does not have any sound installed on it.

 

Every ForceSaber uses a pre coloured bespoke High Powered LED. This LED powers the blade and gives the blade the required colour needed, these looks amazing in low light (dusk) but in direct sunlight or bright day light it will not be 100% visible. We use a single powerful LED which has a high light output and has very low power consumption.

 

All ForceSabers operate with a Standard Battery Setup. Standard Setup is a setup that uses regular AAA batteries to power your ForceSaber. (4 x AAA batteries are not supplied). You can user regular Alkaline batteries or rechargeable NiMh batteries.

 

Every ForceSaber has a mid-grade blade so there extremely stronger but we advise against extreme combat or duelling.

 




Important notice!

Do not leave blade exposed to direct sunlight for prolonged periods of time as this will alter the translucent glue in the blade tip.

When replacing blade DO NOT overtighten the “Micro Screw”. If over tightened, this could lead to damage of the thread. (This is not covered under the returns policy)

 


Please note:- When purchasing this listing you are confirming you have read and seen all the information provided.