Switch Feature:

 Wireless switch mainly used in lighting,LED,Fans.computer, electric doors, windows, lifting equipment, motor control, pumps, lifts control and security industry and other fields.Wireless switch Relay can Simplified circuit.Especial in home LED light fan,very convenient for Home electronics voltage 85V-250V(110V 220V)，More convenient wiring combination.

Switch Specification:

Channel: 1 CH

Working Voltage: AC85~250V

Working Frequency: 315MHz

Max Current: 10A

Contact Capacity: 30A/250VAC; 30A/30VDC

Work AC voltage:85V,110V,220V,250,85-250V

Power：<2000W(Max),Suggest 0-1000W to work.

Operating Temperature: -40'C~+80'C

Output State:   Momentary/Toggle/Latched (adjusted freely by the Jumper on the receiver.)

Receiver Sensitivity:  -105dBm

Code: Learning code

Switch work model:

 1.Self-lock/Toggle: Work model Pin T+M（2+3）Connect

 2.Latched/Inter-Lock: Work model L+M(1+2) Connect

 3.Momentary/Jog : Work model L M T（123）All un-connect

Working ways:

1.Toggle/Self-Lock: Press->On; Press again->Off

 press one button for one time is working/ON .press the same button again is stop/OFF.(1 channel switch(receiver) need 1 button remote control (transmitter).

 2.Latched/Inter-Lock: Press->On; Press other button->Off

press one button is working/ON, press another button is stop/OFF.(1 channel switch(receiver) need 2 buttons remote control (transmitter).

3.Momentary/Jog: Press and hold->On; Release->Off

Keep pressing one button is working /ON. loosen your finger is stop/OFF. 1 channel switch(receiver) need 1 button remote control (transmitter).

Remote Control:

Learn code to add remote control:

   1 Connector the switch to 110V or 220V ..

   2 press the switch board learn button (1-3 second),till the switch LED lighting..

   3 after press the remote control button, till the switch LED lighting.. the relay will be ON or OFF.

   4 test  the controller control the switch.. press the control button, the relay will be on and off.. you can hear it.

   Remove Remote control:

 1 Connector the switch to 110V or 220V ..

2 Press the learning button for about 8 seconds, the indicator light turns on to off, then the code you learned before will be deleted.The remote controller can not control the switch relay.

 Note: 

    The remote controller(Transmitter) need to learn the switch relay(Receiver) control code,or that remote control(Transmitter)can not control the switch(Receiver).We will compatible switch after send the order to you.

Package:

 1/2/3 X  Wall Remote control transmitter (Battery included)

 1 X switch receivers (With cover)