Ultra bright smart LED are arranged in a circle.
The rings are chainable - connect the output pin of one to the input pin of another.
Use only one microcontroller pin to control as many as you can chain together!
Each LED is addressable as the driver chip is inside the LED.
Each one has ~18mA constant current drive so the colour will be very consistent even if the voltage varies, and no external choke resistors are required making the design slim.
Power the whole thing with 5V DC and you're ready to rock.
Every ring is equipped with a single data line with a very timing-specific protocol requiring a real-time micro-controller with a 8MHz or faster processor such as an AVR, Arduino, PIC, Raspberry etc.
There are solder pads on the back for connecting wires or breadboard pins and two mounting holes for securing this board to many different surfaces.
ESP01 LED Driver Module - https://www.ebay.co.uk/itm/175579391153
Please note:
60 LED Ring consists of four sections - When soldering the sections together, line up the four pieces and connect all the GND and 5V pins together as shown above. Then for three out of the four pieces solder DIN to DOUT. The remaining DIN is the input pin for the entire ring.
These Rings are not Adafruit products. 'NeoPixel' and 'Adafruit' are registered trademarks of Limor Fried
8 LED WS2812B 32mm outer diameter and 18mm internal diameter
12 LED WS2812 38mm outer diameter and 27mm internal diameter
12 LED WS2812B 50mm outer diameter and 36mm internal diameter
16 LED WS2182B 44mm outer diameter and 31mm internal diameter
16 LED WS2182 60mm outer diameter and 40mm internal diameter
16 LED WS2182B 68mm outer diameter and 54mm internal diameter
24 LED WS2812 66mm outer diameter and 54mm internal diameter
24 LED WS2182B 86mm outer diameter and 72mm internal diameter
24 LED WS2182B 90mm outer diameter and 75mm internal diameter
30 LED WS2182B 103.5mm outer diameter and 89.5mm internal diameter
32 LED WS2182B 104mm outer diameter and 90mm internal diameter
40 LED WS2182B 126mm outer diameter and 106mm internal diameter
60 LED WS2182B 157.5mm outer and 144.9mm internal diameter. Assembly required. Price is for all four quarters.