1.Voltage & Polarity Testing
2. Continuity Testing
3.Signal Circuit Testing
4.Activating Components in Your Hand
5.Testing Trailer Lights and Connections
6.Activating Components in The Vehicle
7.Activating Components w/Ground
8.Checking for Bad Ground Contacts
9.Following & Locating Short Circuits
DC Voltage Detection Mode Electtric System Tester is the best electrical tester for reducing diagnostic time in all 6-30 volt .vehicle electrical systems. Only a simple hook-up of the tool to the vehicle's battery. | AC Voltage Detection Mode AC detects the maximum and minimum voltage, supply frequency and duty cycle of the circuit under test. While DC volt. detection detects the voltage value of the circuit under test. | Resistance Detection Mode It detects the resistance between the circuit probe under test and the auxiliary ground; While Diode Test can quickly test the operation of the diode assembly and determines if it is conducting. |
Diode Test Mode Integrate LED flashlight on the head, let us work in dark condition easily | Current Overload Protection When the current overload, AUTOOL BT260 Automotive Circuit Tester will automatically disconnect the protection circuit to reduce unnecessary losses. | 10M Inspection Extension Cable Covering from the front to the rear of the vehicle,you can easily inspect the entire electrical circuit system. |
Parameter:
1.DC voltage range : 0-65V +1 digit
2.Resistance range : 0 – 200 KΩ
3.Frequency response of tone pass through 0Hz to 10Khz.
4.Circuit Breaker:Rating curren:1 –10 Amp
5.Testing Standard
100% current : no trip
150% current: trip in one hour
200% current: trip in 3-30 seconds.
300% current: trip in 0.5-4.0 seconds
