Haywire Custom Guitars Inc.
Instruments for Professionals
Call or write with any questions you may have:
Haywire Custom GuitarsHome of the "Gig Ready" Guitar!
Instruments for Professionals Modified Fender Solid MahoganyNashville Telecaster Body
+
22 Fret Custom Shop 25-1/2" Scale Neck
with a Thin Haywire Custom Rosewood Neck
and a Gibson Feel
+
New Gloss finish
+
3 Saddle Speed Loader Bridge
+
New-Special SRV
Neck and Bridge pickups!
+Custom Thin Rosewood neck installed
Fret size: Dunlop 6150 Nut width: 1-11/16
Haywire Custom Shop Maple/Rosewood Neck includes:
New Tuners, Nut, Strings and Full Set-Up
Variable Treble Bleed Circuit included:
This mod keeps the tone you have on "10" throughout the entire range of the volume control.
We add a resistor capacitor network to the input and output of the volume control to
keep the highs from leaving your tone as the volume is decreased.
By adding this circuit we can help you avoid the "muddy-tone" syndrome.
Now your tone is much more controllable and articulate!
Variable tone treble Bleed circuit has been installed for you.
The Haywire Treble Bleed Circuit is included:
The Treble Bleed
is hand-soldered here in our shop: between the input and output lugs of
your guitar volume control pot, to smooth out treble bleed.
Get uniform tone from 1 to 10, and a more rounded and concise audio at low volume.
Turning the volume control applies varying amounts of a specially tuned high frequency filter to ALL pickups.
Now each pickup has the ability to produce a stronger, fuller tone and 50% less noise.
On Humbuckers (either North or South or both coils can be filtered).
This variable treble bleed circuit is now installed
This variable treble bleed/bypass circuit corrects the problem of high frequency losses
provides auto-adjustment of tone at reduced volumes and improves audio taper between 3 and 10.
Featuring:
specially voiced selected custom guitar pickups that deliver
masterful tone, overdrive, clarity,
dynamics, transparency, versatility & balanced tonal response.
Black Pick Guard, 3 way switching and 6 Saddle BridgeSRV Bridge Pickup
It has a fat, rich bottom, with strong, clear mids
New SRV Bridge Pickup Added
Brand New! SRV Neck and Middle Pickups Added
Guitar Description
**Tele with New Electronics & Gibson Scale Neck**
Custom finished Telecaster .....Professional Setup
Refinished Fender Tele body in Mahogany
This Body is in Perfect Shape and will fit
Fender and Warmoth 21 or 22 fret Conversion necks!
This NEW TELECASTER Loaded Body is **Mahogany**The body finish is New!
NOTE:
Please don't ask us to sell the guitar without the electronics-they're included free:
All hardware, pickups,strap knobs, electronics, switch :
INCLUDED and installed on body at NO CHARGE
Listed, upgraded, customized and modified by:Haywire Custom Guitars Inc.
Instruments for Professionals
Call or write with any questions you may have:
Haywire Custom Guitars
Home of the "Gig Ready" Guitar!
This Guitar body comes with one year warranty on our workmanship from Haywire Custom Guitars.
This Guitar features:
2 New SRV Pickups, new electronics and new finish!
SRV-Bridge and Neck Tele Pickups are installed
for fat clean tone or harder driving rock with more grind
Neck and bridge will be equal, or bridge slightly hotter when playing single notes.
SRV Neck Pickup for Warmth with exceptional definition for any chord voicing and great presence for coming through a mix
A Treble Bleed modification ADDED
It allows you allows you to roll off your volume without losing the highs.
Would you like being able to use the volume control... without sacrificing tone?
Now You Can... with a Treble Bleed Circuit Mod added on this guitar!
As you turn your guitar's volume down, the pot allows some of the current to go to ground as opposed to the output.
The frequencies that leave first are the highs, which leave the tone muddy and obscured without an "edge" on it to a discerning ear.
Avoid this by using our:
Haywire Treble Bleed Circuit
This
circuit is now installed
You'll now have uniform tone from 1 to 10, and a more rounded sound at low volume.
It prevents the treble frequencies from bleeding off.
It allows the treble frequencies to be re-introduced into the output for clarity and improved timbre.
At Haywire we simply install a Treble Bleed Circuit capacitor.
We build them in our custom guitars for a better Low and High sound spectrum:
1-error-correction of signals with enhanced clarity
2- preserve high end frequencies
3-improved taper when rolling back your volume control
Get more uniform tone from 1 to 10, and a more rounded sound at low volume.
THE NECK
We want players to have the best possible tools and will be happy to provide them. So, to put to rest any question-YES the neck in the above photo AND in the description is included on this guitar with the option to have it changed out to another shape and size if there are special circumstances and/or physical limitations that require a guitarist to need a different neck profile whether for comfort or playability.
Fingerboard Radius is 12'"
The fingerboard, or playing surface of the guitar neck, is usually curved or radiused across its width. The purpose of this radius is to accommodate the natural ergonomic shape of your fingers when they are in playing position. Comfort is certainly a major factor in selecting a fingerboard radius but it is not the only factor. Musical Style... the fingerboard radius must also allow you to play the style of music you prefer.
strings, set it up, set truss rod, action and intonation.
Then we'll pay additional weight and size surcharges and return the whole guitar back to you
for 89 bucks gig ready!
All hardware, pickups,strap knobs, electronics, switch :
INCLUDED and installed on body: No Charge.
The Neck Pick-Up specs:
SRV Neck Pickup:
DC Resistance: 6.80K
Bridge: 8.0K
The
Bridge and Saddles on this Guitar Body
3 Saddle Speed Loader Bridge
OPTION to substitute a Warmoth Custom Neck with your specs!
We'll Install a NEW fretted, Finished Warmoth Neck for you!
For just $345
from a super wide and fat guitar neck to thin and slim or anything in between!
| Wood and Finish | Maple-Satin Nitro Lacquer finished |
|---|---|
| Orientation | Right Handed with standard Strat or Telecaster Headstock-your choice! |
| Nut Width | Your Choice |
| Nut | White Corian or Black tusq-your choice! |
| Back Contour | Standard thin or your choice |
| Frets | 6105 Stainless Steel Frets or your choice |
| Radius | 10-16" Compound |
| Inlay | Black Face Dots |
| Scale | 24-3/4" Gibson Scale Conversion neck |
See more about our guitars and models on the Haywire Website
Haywire Custom Guitars
Check out our other Guitars!
We are experts in the area of Custom Guitar setup, installation, repair, neck fretting, neck refinishing, neck fitting, alignment, and action adjustment and neck design.
If you feel that you don't have the skill in working with wood or guitar mods-please don't feel bad, instead-send us your project parts, we can do it, and we'll finish it for you.
However you can also write or call us prior to your purchase and ask any questions you'd like.
Send us your neck or body with your favorite strings and we'll mount the neck on it for you for just $45 plus return shipping.
This is an excellent instrument for a serious player. If you take your playing seriously then take a great guitar to the gig with you. This instrument is very sweet and will serve you, the professional player, for many years to come.
You practice hard and you work hard on your playing! So... get a great tool to work with!
No roadblocks to your success as a guitarist!
write with any questions you may have:
email us!
Instruments for Professionals
We Ship World Wide!
email: Haywire Custom Guitars.com
We Ship World Wide!
Haywire Custom Guitars 8-point gig ready guitar process...
1. The 4-axis Alignment of the guitar neck. Each guitar neck is checked and adjusted to insure that it is
true and straight to insure proper alignment on all axis. This step
insures proper action and allows for more accurate and easier guitar
tuning, playing and set-up in the following steps.
2. Inspect and Lube the
guitar tuning gears. Before installing the guitar tuning gears, each
one is checked thoroughly. Each tuning gear is adjusted-there is no play
in the mechanism. They are then lubricated to insure smooth and even
movement to make your guitar tune
accurately.
3. Potting the guitar pickups-We dip the pickups in hot wax to reduce squeal and unwanted guitar feedback
4. Prep the guitar body-Before installing the guitar electronic components, great care is taken to insure that all wires are properly routed, spaced, and grounded to insure years of trouble free service with your guitar
5. Level and polish the frets-This insures that all of the guitar frets are level, eliminating any possibility of fret buzz due to unevenness.
6. Radius the guitar strings-Most guitar necks have a contour over the top of the neck. We adjust the strings to make sure that height of each string follows the contour of the guitar neck.
7. Adjusting the overall guitar string height and the action.Once
we set the contour and radius of the guitar strings, then to adjust the
overall height of the strings from the top of the frets to the bottom
of the strings.
8. Set the guitar intonation-This step is done twice. The intonation is set two times with a 24 hour seat-in period in between to allow the guitar to properly re-seat to the new adjustments.
Check out other Haywire Guitars!!Haywire Custom Guitars is a unique Custom Shop of craftsman where we modify guitars from many manufacturers. We alter instruments to individual or personal specifications and offer the resulting upgraded instruments for sale. We are not a Gibson, Epiphone, Washburn, Wilkinson, Parker, Carvin, BC Rich USA, Jackson, PRS, Ernie Ball, Warmoth or Fender dealer nor are we affiliated with any of these companies. We do however buy used guitars from various manufacturers, new and used instruments from private individuals that we re-build, re-shape, re-sand, re-finish, re-top and customize ourselves for customers upon request. We upgrade electronics, necks, hardware and finishes and offer the finished products for sale. While there are no manufacturer warranties on the instruments we sell. We do however offer our own warranty for one year on our hand crafted finished products and craftsmanship on our finishing, customization and 8 point "Gig Ready" Haywire set-up processes. Fender, Stratocaster, Telecaster and Gibson, Les Paul, Buzz Feiten and related marks are trademarks of Fender Musical Instruments, Gibson, Buzz Feiten respectively and/or their affiliates. All other trademarks or registered trademarks referenced in this site are the property of their respective owners. Products offered via the Website are subject solely to their manufacturer's limited warranty, without additional warranty from Haywire Custom Guitars, and are protected by a variety of patents and trademarks. The guitars we specialize in rebuilding, changing, refurbishing and setting up are instruments with replaceable necks and bodies because we have more requests to add, change and modify these instruments more than any others. We do not build Fender guitars we add value to them in our "8 Point Gig Ready Process" or other modifications requested by our customers from time to time. We do however, replace and upgrade parts as required. We buy guitars from ALL manufacturers used and new and alter and modify them. As noted above several examples include: Gibson, PRS, Jackson, Bigsby®, G&L, The Bigsby® mark and Bigsby tailpiece designs are registered trademarks of Fred W. Gretsch Enterprises, Ltd. and many other brands as noted above and alter these and re-sell them as refurbished instruments. We change necks from one guitar to another to find the best combination. We buy guitars that are distressed and bring them back to a playable state and offer the resulting instrument for sale. We do not and will not copy or build knock -off products of other companies. We do not do anything that would dilute the brand of these manufacturers. The guitars simply leave circulation for a while for upgrading, neck straightening fret leveling and/or replacement, neck replacement, pick up replacement, refinishing, hardware replacement , a set up then re-enter circulation as a better and renewed instrument. We re-furbish, replace, renew, refinish and otherwise repair the guitars we purchase from manufacturers or private individuals for repair and/or restoration by adding new bodies and necks etc. You may also visit our eBay store. Calling or emailing us directly about a purchase of an item stocked in our eBay store constitutes doing business from our website. That purchase is subject to our rules and not eBay rules. However, please be aware that asking to purchase an item "off eBay" may constitute a contract breach with eBay. We want to maintain a good and honest relationship with eBay, compliance with eBay policies and integrity with all whom we do business. Therefore, in the event that occurs, we reserve the right to use a "substitute item". If you ask us to breach our agreement and bypass eBay and sell something from our eBay store directly to you we may instead send a product from our Haywire Custom Guitars website. The item we can substitute will be comparable and of like kind, quality and and/or in many cases, greater value. In this way we can leave our listing intact and eBay will benefit from a direct sale. Last point we'd like to make is; sometimes it is difficult to determine the origin of a part however we try our best to buy carefully and check the parts but if they have no serial numbers it can perhaps in some cases be impossible. Since we do not manufacture signature brand items we rely on the descriptions provided by our suppliers. Sometimes things may get by us or were not identified properly by a seller or supplier. In some situations it can be beyond our control but be aware we stand with our customers to make sure they are happy and satisfied with either the purchase or return and make it right to their satisfaction. We will be glad to refund any money for mistakes that can occur occasionally under those circumstances. We will not knowing sell the wrong products or parts. Returns will not be accepted however on guitars tampered with, opened, changed, modified, liquids spilled on and otherwise missing parts or purchased simply for perusal by competitors to disassemble and return. With prior approval and acceptance of item, returns must be sent immediately within the policy period for returns and specified days in listing. We are selling our set up skills, modification skills, our ability to identify which parts make the best fit, action set, finishing skills, restoration and design skills, and honor the custom requests from individuals who have their own guitars they would like modified. The photos on The Haywire Custom Guitars website are taken by us and are all types of guitars that have passed through the Haywire Custom shop at one time or another for service and/or modification as requested by the original owner or as determined to be necessary to bring the instrument up to an extremely comfortable and playable state as well as intoned as necessary. If you are unhappy with any experience you have had with Haywire Custom Shop please try and work it out with us before considering leaving negative feedback and I'm sure you'll be glad you did. We promise!