FORD FOCUS MK1 DOUBLE DIN FITTING KIT

includes steering wheel control adaptor and multi patch lead
(patch lead covers most pajor brands and chinese 2/3 wire)

Will fit all Mk1 Focus vehicles including 'ST170' and 'RS' models

PLEASE NOTE THAT THIS FACIA ONLY FITS LEFT HAND DRIVE CARS
It will NOT fit UK or any other right hand drive cars


Finally a double din facia for the Mk1 Focus !

This facia is designed to allow you to fit a double din stereo in to your Mk1 Focus (1998-2005)

The maximum hole opening is approximately 179mm wide by 103mm high so please check your front facia size.

Fitment is fairly easy, you will need to remove the old radio first, then remove the facia panel and swap over the clock, hazard light switch and the cigarette lighter socket.

The new double din stereo is the bolted in place using two side mount brackets (which can be seen in the picture in the radio hole) supplied with the kit.

Please note that the opening is NOT large enough for a double din cage, hence why the brackets are supplied to bolt the radio in.

The facia plate also comes with a tiny trim ring which can be placed behind the facia and in front of the new double din radio in case there is a tiny gap around the outsides.


You may need to remove the original Ford radio fitting bracket from inside the dashboard hole.

The only only thing you will notice on this kit is that you cannot refit the ashtray assembly.

Fitting advice

Although some of our products may seem simple to fit we do always advice that you have them installed by a qualified fitter and wait to receive the item before making arrangements for the fitting of the item. We also advice that you contact your insurance company to ensure the modifications you are planning to make to the vehicle does not void your policy. We can not be held accountable if you are not a qualified fitter and you damage the item in any way, if you have booked the fitting before receiving the item or if you do not inform your insurance company of the modification and your insurance is voided.

 

CHINESE RADIOS

Please note this fitting kit will only allow the use of UK branded radios any Chinese or unbranded Radios are not guaranteed to fit. Depending on the vehicle the aperture of the hole in the facia can be either 182mm x 113mm or 182mm x 103. If you would like to know which size cage fits your facia please message us directly.

If you have already purchased a Chinese, Android or unbranded radio and now need to send it back and order a UK branded radio we have many to offer such as Pioneer, Kenwood, JVC and Alpine.