CAT6A Network LAN Patch Cable Ethernet Molded
Gold RJ45 24AWG
Our patch cables are made of 100% pure copper wire.
10G Cat.6A cabling provides transmission performance that exceeds the industry standard Cat.6 parameters and supports the operation of 10GBASE-T over 100 meters.
10G Cat.6A solutions are qualified for frequencies up to 500MHz.
Brand New – Factory Sealed - Lowest price
Conductor Material / Size Bare Copper / 24AWG
Insulation
Material HDPE
Thickness Nominal: 0.20 mm
Unaged Tensile Strength Min. 1.683 Kgf/mm²
Diameter Nominal: 1.0 mm
Colors Blue/White-Blue Orange/White-Orange
Green/White-Green Brown/White-Brown
Unaged Elongation Min. 300%
Jacket
Material Flame Retardant PVC
Thickness Nominal: 0.65 mm
Unaged Tensile Strength Min.1.407 Kgf/mm²
Aging at 100℃
for 168Hrs
Min. elongation retention: 50%
Min. tensile strength retention: 75%
* Designed For: Network Adapters, Hubs, Switches, Routers, DSL/Cable Modems, Patch Panels and other Computer Networking applications. * * UTP Twist Pair * CM Type PVC Jacket * 24AWG 4pair Stranded Copper Wire * 50 Micron Gold Plated RJ45 Plug * RoHS compliant
FAQ
| TIA/EIA is abbreviation of Telecommunication Industry Association and Electronics Industry Alliance that sets telecommunication standards in the US. Our patch cable complies with the latest TIA/EIA telecommunication cable standards.
|
| | There are two standards for wiring color code, 568A and 568B. While there's no difference in connectivity between 568A and 568B, 568B is the most prevalent wiring color code in the US. Our patch cable is 568B wired. |
| | UTP is Unshielded Twisted Pair and SSTP is double shielded (each pair foil shielded then 4 pair braid shielded). Both have the same Ethernet comunication performance, but SSTP has better protection against Electro-Magnetic noise from outside. UTP is accepted for residential and general commercial installation. |
| | CM for communication. It is set by UL (Underwriters labolatory) to indicate the wire jacket material safety. CM rating is safe to use in residential and general commercial installtions.
|
| | AWG (American Wire Gauge) indicates wire thickness. Higher the number, thinner the wire. 24AWG or 26AWG is commonly used for ethernet cables. Stranded wire is a bundle of thin wires as oposed to solid wire that is single solid wire. Stranded wire is more flexible than solid wire and commonly used for indoor network wiring such as patch cable. |
| | Restriction of Hazardous Substances Directive. This directive restricts the use of hazardous materials such as lead or mercury in the manufacture of electronic and electrical equipments. Our cables are all RoHS compliant.
|
|
|