DJI Zenmuse X5R RAW Camera & 3-Axis Gimbal for Inspire 1 Pro with Bonus Osmo RAW Kit
This auction features a Zenmuse X5R camera gimbal with 2 Micro Four Third (MFT) lens, Olympus M.Zuiko Digital 25mm f/1.8 Lens (Black) & an Olympus M.Zuiko Digital ED 14-42mm f/3.5-5.6 zoom in addition to a BONUS Osmo RAW kit for hand-held RAW recording.
The X5R and Osmo kit have been meticulously maintained and are fully operational.
Below are daylight and night ops 4K RAW recorded videos from this Zenmuse X5R camera.
Zenmuse X5R
RAW Camera & 3-Axis Gimbal
Equip your DJI Inspire 1 Pro & Osmo with Micro Four Thirds imaging performance and the benefits of an interchangeable lens system with the Zenmuse X5R RAW Camera and 3-Axis Gimbal. This 4K camera system features an integrated 3-axis brushless gimbal that provides stabilization and enables the camera to move independently of the aircraft. In addition to video, the camera can take 16-megapixel still photos with the option for burst and time-lapse modes.
· 12.8 stops dynamic range for enhanced highlight and shadow detail
· H.264 and Cinema DNG RAW video recording
· Records video and stills to micro-SDHC/SDXC cards or SSD Drives (512 SSD RAW video recording included)
· Single shot or take bursts for 3, 5, or 7 frame
· 4K & HD recording able to capture video at up to DCI 4K 4096 x 2160 at 23.98p or UHD 4K at 29.97p
· 16MP stills capability
· Time-lapse mode captures photos at stepped intervals between 3 and 60 seconds
· Program, Aperture Priority, Shutter Priority, and Manual exposure modes
Please Note: This auction does not include a DJI Inspire 1 multirotor aircraft
Osmo RAW Kit
The DJI Osmo
Handle turns the gimbal into a compact handheld system that lets you capture
smooth, stabilized footage from virtually anywhere. An easily accessible
control stick, trigger, and buttons let you capture photos and video, as well
as control important camera functions all with a single hand. The handle comes
with a built-in microphone and is compatible with a wide range of optional accessories.
DJI Osmo
Handheld Gimbal with Zenmuse X3 Camera & X5 Pro Adapter
Compatible with the Osmo gimbal and camera Zenmuse X3 from the Inspire 1 and the X5 Pro adapter for the Osmo Handle which turns the gimbal into a compact, handheld
system that lets you capture smooth, stabilized footage from virtually anywhere
with the X5R RAW camera. An easily accessible control stick, trigger, and
buttons let you capture photos and video, as well as control important camera
functions all with a single hand. The handle comes with a built-in microphone
and is compatible with a wide range of optional accessories such as the Osmo
Extension Rod and Tripod.
DJI Osmo X5
Adapter
The DJI Osmo X5 Adapter allows a Zenmuse X5R RAW gimbal and
camera to be used with the Osmo Handle. It also provides a
communication port for the DJI Focus remote follow focus receiver to tap into.
DJI Osmo
Smartphone Holder
The Osmo Phone Holder from DJI attaches to the side rosette
on the Osmo handheld gimbal system. This enables you to use mount your smartphone
and use it as a monitor to view a live image and adjust camera settings over
Wi-Fi through the DJI GO app. The rosette attachment allows the mount to be
rotated to achieve an optimal viewing angle.
Universal
Mount for Accessories
The Universal Mount for Osmo from DJI provides a cold shoe
for standard on-camera accessories such as lights or microphones. It attaches
to the handle via the same rosette as the mobile device holder. If you wish to
use the mobile device holder and the Universal Mount at the same.
The Osmo Cold Shoe from DJI is designed for the Osmo
Universal Mount. It screws into the 1/4"-20 holes on the Universal Mount
and allows you to attach shoe-mount accessories, such as select lights. When
screwing the Cold Shoe in, you can rotate it and position it as desired before
tightening it. A 1/4"-20 screws is included for securing it to the
Universal Mount.
DJI Extension
Stick for Osmo
The Extension Stick for Osmo from DJI is a pole-style
accessory designed to broaden the types of shots you can achieve, especially
high angles and selfies. It can also be used to connect the camera with
standard 1/4"-20 accessories such as a tripod or monopod. It's compatible
with the Osmo, Osmo+, Osmo Mobile, Osmo Pro, and Osmo RAW.
·
Telescoping design
·
Articulating ball head
·
Rosette for mobile device holder or Universal Mount
·
Hand strap to prevent accidental drops
·
1/4"-20 socket on base
Straight
Extension Arm for Osmo
The Straight Extension Arm for Osmo from DJI allows you to
use multiple rosette-based accessories at once. It attaches in place of the
mobile device holder, and can be used with the Bicycle Mount, Universal Mount,
and mobile device holder all at the same time.
DJI Base for
Osmo
The DJI Osmo Base is used to fix the Osmo gimbal on tables or
other level surfaces so that it remains stable without tipping over. It can
additionally be mounted on desktop tripods and other supports via a
1/4"-20 threaded mounting hole on the bottom.
DJI Osmo
Intelligent Batteries and Charger – Quanty 4
Designed specifically for the Osmo handheld gimbal system,
the LiPo Osmo Intelligent Battery from DJI has a 980mAh capacity and features
intelligent battery-saving features.
Rode VideoMicro
Compact On-camera Mic & WS9 Deluxe Windshield
The VideoMicro from RODE is a compact on-camera microphone
that features a cardioid condenser mic capsule for capturing audio recordings.
The lightweight microphone can be used when paired with a video camera for
applications such as weddings, interviews, and more.
The VideoMicro reduces distracting peripheral sound and
focuses on the audio in front of the camera. The microphone body is made from
aluminum, giving it a high level of RF rejection, and is finished in a ceramic
anti-glare black coating. The mic is powered by camera plug-in power (min. 3V)
so no battery is required.
In addition, the VideoMicro includes a Lyre shoe-mount that
minimizes unwanted vibrations, handling, and cable-borne noises, and a WS9
synthetic furry windshield with a foam inner cell, designed for use in outdoor
situations where wind and environmental noise can inhibit recordings. A
1/8" TRS patch cable is also included.
The WS9 from Rode is a deluxe microphone windshield for the Rode VideoMicro. It can be used to minimize wind noise when recording outdoors in applications for videographers, interviews, sports, and more. It is made of open-cell foam and covered by synthetic fur.
DJI Bike Mount
for Osmo
The Bike Mount for Osmo from DJI features a clamp for
attaching the camera to bicycle handlebars or other similar-sized tubular
structures. It features a rosette that attaches in place of the Osmo mobile
device holder. It's compatible with the Osmo, Osmo+, Osmo Pro, and Osmo Raw.
SKB Waterproof
Hard Case
The iSeries 1510-6 Waterproof Case for DJI OSMO features a
custom-cut foam interior that accommodates a DJI Osmo Handle with an attached
Osmo 4K Camera and Gimbal, or an attached Zenmuse X3 Camera and Gimbal. There
is also a compartment that can store a Zenmuse X5 Camera and Gimbal when using
the foam from the X5's packaging. Additionally, there are slots for five
batteries, two battery chargers, and two filters, as well as a large accessory
compartment.
Built to military grade standards, iSeries injection molded
waterproof cases are constructed of high-strength polypropylene copolymer resin
and feature a complete gasket seal that makes it waterproof, airtight, and
submersible. The exterior is also resistant to corrosion and impact damage, and
features molded-in hinges, a patented "mini trigger release" latch
system, and snap-down grip handle with rubber over-molded cushion. Additional
features include an automatic ambient pressure equalization valve and loops for
adding an optional lock.
Key Features
·
Custom foam interior to fit DJI OSMO with attached Osmo
Camera and Gimbal, or Zenmuse X3 Camera and Gimbal
·
Compartment for Zenmuse X5R camera when using X5R foam
packaging
·
Slots for two battery chargers, five batteries, and two filters
·
Large accessory compartment
·
Polypropylene copolymer resin exterior
·
UV, solvent, corrosion and fungus resistant (MIL-STD-810F)
·
Complete gasket seal makes these cases absolutely watertight
(MIL-STD-C-4150J)
·
Automatic ambient pressure equalization valve (MIL-STD-648C
& IP67)
·
Resistant to corrosion and impact damage
·
Molded-in hinges
·
Rubber over-molded cushion grip handle
·
"Trigger release" latch system
·
Locking loops for a customer supplied lock
Camera Lens
Olympus
14-42mm F/3.5-5.6
Distinguished
by its slim pancake form factor, the black M.Zuiko Digital ED 14-42mm f/3.5-5.6
EZ from Olympus is a versatile 28-84mm equivalent zoom designed for Micro Four
Thirds mirrorless cameras. Despite its compact profile, this lens includes an
advanced optical design, which includes aspherical, low dispersion, and high
refractive index elements to achieve a high degree of sharpness and clarity
throughout the zoom range. A ZERO coating has also been applied to individual
elements to suppress flare and ghosting for high contrast, color-accurate
imagery. In addition to the optical design and small size, the lens is also
characterized by its Electronic Zoom mechanism, for smooth and constant zoom
movements, and a Movie & Still Compatible (MSC) AF system that is quick, quiet,
and precise to suit both video and photo applications.
·
Wide-to-portrait-length
zoom is designed for Micro Four Thirds mirrorless cameras and provides a
28-84mm equivalent focal length range.
·
Three
aspherical elements and one S-HR (Super-High Refractive Index) element are used
to reduce spherical aberrations and distortion throughout the zoom range. One
extra-low dispersion element is featured, too, to suppress color fringing and
chromatic aberrations for improved color accuracy and clarity.
·
A
ZERO (Zuiko Extra-low Reflection Optical) coating has been applied to
individual elements to minimize lens flare and ghosting for improved contrast
and color fidelity when working in strong lighting conditions.
·
Electronic
Zoom control uses a linear motor to produce smooth, dramatic zooming effects to
complement your video recording. Two zoom speeds are available, too, to suit
various subject types and recording needs.
·
Movie
& Still Compatible (MSC) autofocus system benefits both photo and video
applications due to its smooth, quiet, and fast performance.
·
Pancake
form-factor measures just 0.9" thick and an Electronic Retraction feature
automatically extends and retracts the lens when the camera is powered on or
off.
·
Equivalent:28-84mm
Olympus
M.Zuiko Digital 25mm f/1.8 Lens (Black)
The
black M.Zuiko Digital 25mm f/1.8 from Olympus is a 50mm equivalent prime for
Micro Four Thirds mirrorless cameras. The normal field of view is complemented
by a fast f/1.8 maximum aperture for controlling depth of field and producing
selective focus effects, and also benefits working in difficult lighting
conditions. Two aspherical elements are used in the optical design to help
reduce spherical aberrations in order to achieve a high degree of sharpness,
and these elements also help to reduce the overall size and weight of the lens.
Additionally, a Movie & Still Compatible (MSC) autofocus system is employed
to deliver quick, quiet, and precise focusing performance to suit both video
and photo applications.
·
Normal-length
prime is designed for Micro Four Thirds mirrorless cameras and provides a 50mm
equivalent focal length.
·
Fast
f/1.8 maximum aperture helps to achieve shallow depth of field and selective
focusing effects, and also benefits working in difficult lighting conditions.
·
Two
aspherical elements are used to reduce spherical aberrations and distortions in
order to provide increased sharpness and more accurate rendering.
·
Movie
& Still Compatible (MSC) autofocus system benefits both photo and video
applications due to its smooth, quiet, and fast performance.
·
Rounded
seven-blade diaphragm contributes to a pleasing bokeh quality.