Motor Control:

• 1 x Motor control channel with maximum load (current): 4A;
• Suitable for garage doors, barriers, awnings, windows;
• Secured with fuse;
• Programmable opening(closing) time;
• "Auto-close" function based on timer and/or sensor;
• Supported types of motors:
  • Reversible AC asynchronous (induction) motors equipped with limit switches;
  • Reversible DC motors equipped with limit switches;

Two independent protection options:

• Via digital input using IR beam sensor;
• Via programmable over-current motor limit;

Relays:

• 2 x SPDT Relays;
• Contacts parameters: 10A / 250VAC, 15A / 120VAC, 10A / 28VDC;

Digital Inputs:

• 3 x optically-isolated;
• Status led for each;
• Input voltage: 3-24VDC;
• Power output: 12VDC or 24VDC for sensors;

Analog Input:

• 1 x analog input (ADC);
• Input voltage: 0-5VDC;
• Power output: 5VDC for sensors;

Temperature Sensor Input:

• 1 x temperature input channel for sensor DALLAS;
• Supported sensors models: DS1820, DS18S20, DS18B20;
• Maximum (tested) cable length: 20 meters;
• Power output: 3.3VDC for sensors;
• Software selectable units °C or °F;

RF remote control:

• 2 x pocket remotes for open/close (additional can be purchased separately);
• Working frequency: 433 MHz;
• Working distance: 50 meters open area;
• Encryption: rolling code;
• Programming the opening (closing) time function;
• Maximum number of stored remotes: 20;

Standalone modes:

• Weekly schedule events table for automatic actions: max 20 events;
• Controlling motor and relays based on sensors automatically;
• Timer functions;

Built-in real time clock (RTC):

• Used for schedule (calendar) stand-alone work;
• Option for auto-synchronization via Internet (NTP);
• Daylight savings option;
• Back-up power supply keeps the time for days when power off;

Communication:

• Wireless Wi-Fi 802.11 b/g/n standard;
• External Wi-Fi antenna 3 dBm for better range;
• Supported Wi-Fi modes: Access Point (AP), Station (STA);
• Supported Wi-Fi encryption modes:
  • WEP;
  • WPAPSK-TKIP;
  • WPAPSK-AES;
  • WPA2PSK-TKIP;
  • WPA2PSK-AES;
• Protocols: HTTP, DHCP, DNS, NTP, ICMP (ping), MQTT(QoS 0), XML, JSON, SMTP;

Web Interface:

• System configuration and monitoring;
• Setup and control the motor open/close timings and I/O;
• IP camera embedding option;
• Setup the weekly schedule;
• Backup and restore function of all the parameters;
• Access the logs;
• Secure login authorization;
• Access protection (by IP and MAC address);
• Mobile friendly web interface;

Push notifications upon event:

• Emails notifications (no SSL supported, only AUTH PLAIN LOGIN);
• MQTT (Android) notifications - accessible from DAE-aModules;

Events log:

• Internal EEPROM memory for events log;
• Minimum 330 (typical 400) I/O events;
• Minimum 270 (typical 400) system events;

TCP/IP Services:

• HTTP server: Access (GET) current measurements in XML/JSON format, download log files in .txt format;

Two types of power supply options selectable during purchase:

• DC power supply: DC12V
• DC power supply: DC24V

Physical and Environment:

• Working temperature range: -25°C ~ +70°C;
• Working humidity range: 40% ~ 85%;

Two types of housing selectable during purchase:

• DIN rail box (IP20): 157 x 86 x 58 mm;
• Distribution Box (IP65): 200 x 155 x 80 mm;

Documentation:

• Detailed user's manual - here

 

• 1 x smartDEN Opener module (power supply voltage and box type are selectable during purchase);
• Free android application - download
• 2 x RF remotes 433 MHz
• Backup fuse 6.3A

Please note power supply adaptor is not included in the package. We have suitable adapters in our eBay store

Please contact with us, we offer power supplies, sensors additional remotes and many more for this item in our eBay store

smartDEN Opener can be used successfully for opening/closing barrier. Here are the benefits using smartDEN Opener for such kind of application:

• Easy set-up of the opening/closing time from web browser, RF remote.
• Open/close from web browser, computer software or mobile smart phone (for example using mobile app DAE-aModules);
• Embedding IP camera in the web server, allows integrated solution for monitoring/control the barrier;
• An RFID reader with SPST output can be connected to one of the optically-isolated digital inputs to open the barrier;
• RF remote can open / close the barrier (up to 20 unique RF remotes can work with single smartDEN Opener module);
• A barrier IR beam sensor can be used for car detection and barrier strike prevention;
• Auto-closing function when the car has passed;
• smartDEN Opener internal log files can be accessed any time;
• External lamp can be controlled by smartDEN Opener;

 

 

 

 

 

smartDEN Opener is also very useful in application requiring garage door control. It provides smart control via mobile phone or internet and open/close via RF remote at the same time.

• Easy set-up of the opening/closing time from web browser, RF remote.
• Open/close from web browser, computer software or mobile smart phone (for example using mobile app DAE-aModules);
• Using DAE-aModules android app, it is possible to open the door automatically when the car is approaching it (using GPS);
• Embedding IP camera in the web server, allows integrates solution for monitoring/control the door;
• An RFID reader with SPST output can be connected to one of the optically-isolated digital inputs to open the barrier;
• RF remote can open/close the door (up to 20 unique RF remotes can work with single smartDEN Opener module);
• A barrier IR beam sensor can be used for car detection and barrier strike prevention;
• Auto-closing function when the car has passed;
• smartDEN Opener internal log files can be accessed any time;
• External lamp can be controlled by smartDEN Opener;
• A temperature sensor can be connected in order to send notifications if door is frozen;

 

Motorized awnings also can be controlled via smatDEN Opener with success. Besides the regular open/close function, here the smartDEN Opener can provide and function to close the awning if the wind speed is too high. Thanks to its internal schedule the awning can be controlled automatically standalone by date/time or a light sensor can be used as well.

• Easy set-up of the opening/closing time from web browser, RF remote.
• Open/close from web browser, computer software or mobile smart phone (for example using mobile app DAE-aModules);
• A light sensor can be used to open/close the awning;
• The internal weekly standalone schedule with RTC can control the awning based on date/time;
• RF remote can open/close the awning (up to 20 unique RF remotes can work with single smartDEN Opener module);
• An internal current measurement solution can be used optionally in order to protect the motor from awning hits detecting its consumption in real time.
• smartDEN Opener internal log files can be accessed any time;
• A wind sensor can be connected in order to close the awning if storm is coming;
• Sending notifications and emails about weather temperature, light and wind level;

 

Roof windows can be controlled by smartDEN Opener as well. Additionally the rich amount of sensors and the capability of sending notifications make the device ideal for home automation and even security applications.

• Easy set-up of the opening/closing time from web browser, RF remote.
• Open/close from web browser, computer software or mobile smart phone (for example using mobile app DAE-aModules);
• Wall switch can be connected to some of the digital inputs for manual open/close;
• RF remote can open/close the door (up to 20 unique RF remotes can work with single smartDEN Opener module);
• A sensor can close the window if rain is detected;
• smartDEN Opener internal log files can be accessed any time;
• A temperature sensor can be connected in order to send notifications if window is frozen;
• Connecting light sensor for open/close the window during the day/night;
• Scheduled standalone timings for opening/closing the window;
• An internal current measurement solution can be used optionally in order to protect the motor from window hits detecting its consumption in real time.
• A wind sensor can be connected in order to close the window if storm is coming;
• Sending notifications and emails if the window is opened by third party;

 

Motorized window blinds are also possible to be automated via smartDEN Opener. Here the benefit is that the module can be scheduled to set up/down the blinds standalone by internal clock (weekly schedule). From the other hand a sunlight sensor can do that as well. Opening via mobile phone (android app DAE-aModules), web browser, computer, wall switch, RF remote...

• Easy set-up of the opening/closing time from web browser, RF remote.
• Open/close from web browser, computer software or mobile smart phone (for example using mobile app DAE-aModules);
• Using DAE-aModules android app, it is possible to open the door automatically when the car is approaching it (using GPS);
• Embedding IP camera in the web server, allows integrates solution for monitoring/control the door;
• An RFID reader with SPST output can be connected to one of the optically-isolated digital inputs to open the barrier;
• RF remote can open/close the door (up to 20 unique RF remotes can work with single smartDEN Opener module);
• A barrier IR beam sensor can be used for car detection and barrier strike prevention;
• Auto-closing function when the car has passed;
• smartDEN Opener internal log files can be accessed any time;
• External lamp can be controlled by smartDEN Opener;
• A temperature sensor can be connected in order to send notifications if door is frozen;

 

smartDEN Opener is designed to be able to control two types of motors (up to 4A current consumption):

• Reversible AC asynchronous (induction) motors equipped with limit switches;
• Reversible DC motors equipped with limit switches;

 

 

 

 

 

 

The RF remotes are for open/close operations and additional can be purchased separately from this link. The working frequency is 433 MHz (which should be allowed in most of the countries). Working distance is 50 meters open area and the security encoding is one of the best for such applications - rolling code. As an extra function, from the remotes it is possible to program the opening (closing) time. The maximum number of stored remotes is 20.

Additional remotes can be ordered from here

 

 

 

 

• Wireless Wi-Fi 802.11 b/g/n standard;
• External Wi-Fi antenna 3 dBm for better range;
• Supported Wi-Fi modes: Access Point (AP), Station (STA);
• Protocols: HTTP, DHCP, DNS, NTP, ICMP (ping), MQTT(QoS 0), XML, JSON, SMTP

 

 

 

 

 

 

The smartDEN Opener supports the mandatory built-in web server for easy opening/closing the door, I/O monitoring, timings configurations, setting up the I/O modes and all the other parameters. The module has and small memory for events logs which can be also accessed from web browser. Additionaly an IP camera can be connected to the web server monitoring almost in real time the opening/closing the door.

 

 

 

 

 

 

 

 

 

 

 

The device is equipped with two SPDT relays for controlling additional lamp, heater and so on. The relays can be turned ON/OFF while opening/closing the door or even based on some input change.

The three Digital Inputs are optically isolated and are very suitable for any button/switch/contact for manual opening/closing the door. A security sensor PIR, smoke, gas, IR beam detector, door sensor or any other with relay output (NO or NC) can be used to control the gate or event to send notification via email or MQTT.

The analog input is with voltage range 0-5VDC and it is suitable for light sensor TSL350R, hummidity sensor HIH-4000 or any other sensor with analog output within the voltage range 0-5VDC. The analog input also can be adjusted to control the door and relays as well.

The temperature input is for one wre sensors DS18B20 and DS18S20 like this one. It can be used for situations when the door is freezing and an email alert can be sent to the user.

Additionally the module provides two extra supply sources for sensors - 5VDC and 12(24)VDC.

 

 

 

 

 

 

 

 

 

 

The first protection mode is based on measuring the consumed current by the motor in real time and in case of overcurrent it open the door. Usually this is happening when there is critical situation (for example the door is hitting object and that makes to increase the motor consumption).

The second protection mode uses one of the digital inputs with most oftenly connected PIR beam sensor to it. Usually the sensor is installed under the door and in case a movement is detected while the door is closing, it will be opened safely. In case of barrier control an option for auto-close may be activated and then the barrier will be closed automatically when the car deactivates the sensor.

The user can select which protection mode to use - the first one, the second one, none of them or both.

 

 

 

 

 

 

 

 

 

 

 

Applications like awnings and blinds control often require actions based on weekly timer. smartDEN Opener, like other smartDEN devices, supports up to 20 weekly schedule events which allow standalone control of the motor, turning relays, enable/disable inputs alarms without need for constant computer connection (standalone).

 

 

 

 

 

 

smartDEN Opener is supported by DAE-aModules android app. It is possible to be accessed the garage door (opening/closing), the relays, monitoring the sensors, location control and push notifications receiving. For better flexibility, there are two ways for communication with the smartDEN Opener - via cloud or via direct requests.

The iOS app update for DAE-iModules is also on its way for smartDEN Opener support.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Thanks again to the android app DAE-aModules the smartDEN Opener can send push notifications up on event like door opening or sensor alarm.

The same is valid for the Email notifications as well.

 

 

 

 

 

 

 

 

Thanks to our android application DAE-aModules, the user is able to activate a function which allows the smartphone to send open command to the smartDEN Opener while the the user approach the garage door based on the smartphone GPS coordinates.

 

 

 

 

 

 

 

 

 

 

 

smartDEN Opener can be controlled via MQTT requests and HTTP/XML/JSON requests. We provide also range of software examples (SDK) in different platforms.

 

 

 

 

 

 

 

 

 

 

 

 

 

• General links
  • Product documentation - here
  • How to access the module through the Internet (port-forwarding) - here
• Software by Denkovi
  • DAE-aModules - Mobile app for Android mobile devices, support link here
  • Denkovi Finder - utility for discovery DAEnetIP4 and smartDEN devices in local network - here
• third party software
  • openHAB - This device is supported by the powerful home automation system openHAB. Please take a look at our application note for more information. You can also download the configuration files for openHAB (ver 2.2.0) for communication via HTTP and MQTT requests.
  • MQTT Spy - Test MQTT client
  • MQTT Dashboard android app
  • MQTT Probe iOS app
  • Domoticz - This device is supported by the powerful home automation system Domoticz. Please take a look at our application note for more information - https://denkovi.com/domoticz-with-denkovi-modules

• Java - Example 1 (HTTP GET Requests) and Example 2 (MQTT)
• Delphi Lazarus - Demo code using HTTP GET Requests
• Node.js - Example 1 (HTTP GET Requests) and Example 2 (MQTT)
• PHP Demo - Example how to access smartDEN Opener via GET HTTP Requests
• Visual Basic 6 (HTTP GET Requests) - example how to communicate with the module using HTTP get requests.
• VB.NET - Example 1 (HTTP GET Requests) and Example 2 (MQTT)
• C#.NET - Example 1 (HTTP GET Requests) and Example 2 (MQTT)
• C++.NET - Example 1 (HTTP GET Requests)
• Python - Example how to set/get the device I/O status using HTTP GET requests
• Javascript - Example how to set/get the device I/O status using HTTP GET requests
• More info - here