Main Unit | |
---|---|
Output Power | 150 W per channel @ 8 Ohms, 20 Hz to 20 kHz, 0.06% THD, 2 channels driven 165 W per channel @ 8 Ohms, 1 kHz, 0.9% THD, 2 channels driven 230 W per channel @ 8 Ohms, 1 kHz, 10% THD, 1 channel driven (JEITA) |
Dynamic Power per Channel | 175 W @ 8 Ohms (front L/R) 220 W @ 6 Ohms (front L/R) 295 W @ 4 Ohms (front L/R) 410 W @ 2 Ohms (front L/R) |
Channels | 9.2 |
Object-Based Audio Support | Dolby Atmos, DTS:X |
Audio Decoding | Dolby TrueHD, Dolby Digital Plus, Dolby Surround, DTS-HD Master Audio |
Video | |
---|---|
Pass-Through | 4K/60p (4:4:4), HDR10, Dolby Vision, HLG, BT.2020 |
HDCP Version | HDCP 2.2 on all ports |
Connectivity | |
---|---|
Bluetooth | Yes (SBC / AAC) |
Wi-Fi | Yes, dual-band (2.4 / 5 GHz) |
AirPlay | Yes |
Tuner | AM / FM |
Inputs | 7 x HDMI 3 x optical TOSLINK 3 x digital coaxial 2 x RCA component video 4 x RCA composite video 1 x gold-plated stereo XLR 8 x stereo RCA audio (1 front) 1 x stereo RCA audio (phono, with ground screw) |
Outputs | 3 x HDMI 2 x subwoofer pre-out 1 x Zone 2/Front Presence stereo RCA pre-out 1 x Zone 3/Rear Presence stereo RCA pre-out 1 x 7-channel RCA pre-out 1 x gold-plated stereo XLR Front pre-out 1 x 1/4" / 6.35 mm headphone (front) |
Other Connectors | 1 x FM tuner antenna 1 x AM tuner antenna 1 x USB (front) 2 x wireless antennas 1 x Ethernet LAN 1 x 1/8" / 3.5 mm calibration mic (front) 2 x 1/8" / 3.5 mm 12 V trigger out 1 x 1/8" / 3.5 mm remote in 1 x 1/8" / 3.5 mm remote out 1 x 9-pin RS-232C |
Speaker Connectors | 11 x binding post pairs |
HDMI CEC | Yes |
Audio Return Channel (ARC) | Yes |
USB Formats | MP3, WMA, WAV, MPEG-4 AAC (up to 48 kHz / 16-bit), ALAC (up to 96 kHz / 24-bit), FLAC (up to 384 kHz / 24-bit), AIFF (up to 384 kHz / 32-bit), DSD (up to 11.2 MHz) |
General | |
---|---|
Power Requirements | Not specified by manufacturer |
Standby Power Consumption | IR Only: ≤0.1 W |
Dimensions (W x H x D) | Without Antenna: 17.125 x 7.5 x 18.625" / 43.5 x 19.05 x 47.31 cm With Antenna: 17.125 x 10.625 x 18.625" / 43.5 x 26.99 x 47.31 cm |
Weight | 39.9 lb / 18.1 kg |
Enjoy immersive multi-channel sound with the Yamaha AVENTAGE RX-A3080 9.2-Channel Network A/V Receiver. It delivers up to 150W of power per channel at 8 Ohms and features Dolby Atmos and DTS:X compatibility for object-based audio support. Built-in Bluetooth and AirPlay support allows the receiver to wirelessly stream music from compatible sources, such as smartphones and tablets, while Yamaha's Compressed Music Enhancer helps to deliver optimized sound quality.
Onboard Wi-Fi and Ethernet connectivity allows the AVENTAGE RX-A3080 to access music from your connected computer or NAS. Amazon Alexa compatibility enables you to control certain functions of the receiver with just your voice through your Alexa-enabled devices. With seven HDMI inputs and three outputs, this receiver can act as a video switcher for your HD source components. It will pass through HDR UHD 4K signals and will upscale non-UHD signals to near-4K quality for enhanced viewing of lower-resolution sources when paired with a UHD display. The receiver also has a USB port for accessing media stored on USB flash drives. YPAO-RSC multipoint sound optimization will calibrate the receiver to your speakers and room setup for a tailored listening experience.
Note: Access to certain Internet-based content may require a subscription to a service.