JJC JM-II series Radio Frequency Wireless Shutter is designed for most DSLR and SLR cameras that have a remote socket on the camera body. The system works at 433MHZ frequency and has 16 available channels. What’s more, this wireless remote system allows the transmitter to trigger the receiver from 30 meters away. The JM-II receiver simply attaches to a compatible camera's accessory shoe, and then just connects the supplied JJC receiver cable to the camera's remote socket. The receiver is powered by one piece of CR-2 lithium battery( Not Included ) while the transmitter is powered by one piece of 23A battery( Not Included ). JM-II transmitter can trigger the camera shutter at five modes: single shot, 5 seconds delay shot, 3 continuous shots, unlimited continuous shots and bulb shot. The receiver has a 1/4"-20 tripod mount socket on the bottom, so you can even mount the receiver onto a tripod. Most importantly, our JM-II transmitter is able to fire multiple receivers at the same time. The receiver itself with the connecting cable can be used as a Wired Remote Switch, then half press to focus, full press to take a photo. All these features make it good for eliminating camera shake in long exposure photography.
Product Highlights
- Compatible with different brands of cameras by replacing the JJC connecting cable
- 16 available channels
- Can trigger the shutter from 30 meters away
- Support single shot, 5 seconds delay shot, 3 continuous shots, unlimited continuous shots and bulb shot
- Transmitter can fire multiple receivers
- Receiver itself acts as a cable switch
Package Contents
- JM transmitter x 1
- JM receiver x 1
- Connecting cord x 1
- Instructional Manual x 1
Attention:
1.IMPORTANT: Due to logistics restrictions, battery has to be removed when shipping to some countries.
2. Connecting cable can be sold saparately, in the case that you need this item for different cameras, you can buy another cable. If you don't know which cable should be chosen, please contact us.
3.Please pay attention to adjust the receiver and transmitter to the same channel while using, and check if you installed batteries.
Compatible with following cameras
EOS 1D
|
EOS-1D C
|
EOS 1D Mark II
|
EOS 1D Mark III
|
EOS 1D Mark IV
|
EOS-1D Mark II N
|
EOS 1Ds
|
EOS 1Ds Mark II
|
EOS 1Ds Mark III
|
EOS-1D X
|
EOS-1D X Mark II
|
EOS 1V
|
EOS 3
|
EOS 5D
|
EOS 5D Mark II
|
EOS 5D Mark III
|
EOS 5D Mark IV
|
EOS 5DS
|
EOS 5DS R
|
EOS 6D
|
EOS 6D Mark II
|
EOS 7D
|
EOS 7D Mark II
|
EOS 10D
|
EOS 20D
|
EOS 20Da
|
EOS 30D
|
EOS 40D
|
EOS 50D
|
EOS D30
|
EOS D60
|
EOS D2000
|
EOS R5
|
Replacing
JM-A(II) replacing Canon RS-80N3/TC-80N3
JM-B(II) replacing Nikon MC-30/MC-36/MC-30A
JM-C(II) replacing Canon RS-60E3, Pentax CS-205, Contax LA-50, Samsung SR9NX01
JM-D(II) replacing Panasonic DMW-RS1/RSL1, Leica CR-D1
JM-F(II) replacing Sony RM-S1AM/RM-S1LM, Konica Minolta RC-1000S/RC-1000L
JM-F2(II) replacing Sony Multi Connector, Sony RM-SPR1
JM-I2(II) replacing Sigma CR-31
JM-J(II) replacing Olympus RM-UC1
JM-K(II) replacing Fujifilm RR-80
JM-M(II) replacing Nikon MC-DC2
JM-N(II) replacing Samsung ED-SR2NX02
JM-O(II) compatible with Fujifilm FINEPIX HS50EXR
JM-R(II) replacing Fujifilm RR-90
JM-PK1(II) replacing Pentax CS-310
JM-J2(II) replacing Olympus RM-CB2
JM-R2(II) replacing Fujifilm RR-100
JM-PK1(II) replacing Pentax CS-310
JM-J2(II) replacing Olympus RM-CB2
If there is any problem, please contact us. We will answer your email within 1-2 business day☺