This is a great set of easy-reassembling LCD controller kit which is used to turn a bare LCD panel into a desktop/PC monitor. (Plug&play, no need soldering)
This kit is suitable for 1600*900 resolution EDP 30-Pin signal port 60Hz screen
Compatible with the following screen model:
Come In Standby Mode When Not Input Signal
Input Power Adapter: DC 12V/3A-5A (need to buy extra)
(Special note: Do not use more than 12V voltage power supply, otherwise the circuit board will be damaged)
DC port: 2.5MM and 5.5MM inner+ outside-
Video Input: HDMI VGA
Audio Input: HDMI
Audio Output: Small speaker (need to buy extra)
OSD: Brightness Contrast VOL+ VOL- Language And So On
Language: English French German Spanish Italian And So On
Board Size: 108mmX55mmX16mm
Package List:
1Pcs x EDP controller board
1Pcs x EDP signal cable
1Pcs x Keyboard with cable
Special Note: Except to the accessories included in the kit, you will need to prepare the power adapter and HDMI or VGA cable yourself.
Installation Steps:
1. Take away the old screen cable from the LCD panel.
2. Connect the new screen cable to your LCD panel. (Note the connector contact direction)
3. Connect the controller board to the PC with HDMI or VGA signal cable.
4. Input power. (Please use the standard LCD screen power supply, other power input may not boot normally)
5. After all finishing the connecting, please do not rush to power on! No metal contact is allowed when powering on the controller board, otherwise short circuit may occur, which may cause unavailability of the controller board.
Language Settings:
1. Use the "MENU" button on the button board to enter the setup menu.
2. Press the "UP" or "DOWN" key to select the Fourth item "OSD", and then press the "ENTER" key to confirm the selection.
3. Select the First item and press "ENTER" to enter the language selection.
4. Press the "UP" or "DOWN" key to select the desired language. Press "ENTER" again to confirm and exit.
The following reference pictures.