Descriptions:
Wireless remote control switch, widely used in lighting control of smart home, remote control of access control system, garage door, wireless modification of intercom doorbell, wireless control of household appliance switch, etc.
High power remote control:
1 Long distance control ,the RF Remote control Signal Up to 0-300M,in open area ( If the obstacle can control about 0-150M, like Signal through wall or building,can not through the hill or oversize building )
Channel: 4 CH
Encode: Fixed code,Learn Code
Frequency:315Mhz/433MHz
Power Supply: 1 X 9V Battery (include)
Switch Receiver
Channel: 4 CH
Decode: Fixed code, soldering
Power Supply (Operating Voltage): DC 12V
Relay: DC/AC 1V-250V Load Voltage
Work Voltage Range of Relay: AC 110-240V/85V-220V/ 1V-250V
Sensitivity:-105 dBm
Operating Temperature:-40 C - 80 C
Work model: Working mode:Momentary, Toggle(self-lock), Latching(inter-lock)(Change style by model Pin,momentary default)
Work Model:
Toggle/Self-Lock: Press->On; Press again->Off
press one button for one time is working/ON .press the same button again is stop/OFF .
Latched/Inter-Lock: Press->On; Press other button->Off
press one button is working/ON ,press another button is stop/OFF . ( 1 channel switch( receiver) need 2 buttons remote control (transmitter).
Momentary/Jog: Press and hold->On; Release->Off
Keep pressing one button is working /ON. loosen your finger is stop/OFF .1 channel switch(receiver) need 1 button remote control (transmitter )
Remote Control Removal and Add
Learn code to add remote control :
Connector switch to 12V ,Press switch learn button 1-3s,LED lighting,press the remote control button,till LED off.press the control button, the relay will be on and off.(it can hear it,compatible switch with controller ,after send order to you,usually not need learn control code)
Remove Remote control:
Connector switch to 12V,Press learning button for 8-10S,till LED Off.(Control Code deleted,controller can not control the switch relay)
Package:
1 x 12V 4CH Receiver(With Box)
1/2/3X Remote Control Transmitter (9V Battery include)