Features
Wireless remote control switch, widely used in lighting control of smart home, remote control of access control system, garage door, wireless modification of intercom doorbell, wireless control of household appliance switch, etc.
Description:
1.High power Transmitter Control
Channel: 2 CH
Control Distance: Long distance control ,the RF Remote control Signal Up to 0-300M,in open area ( If the obstacle can control about 0-150M, like Signal through wall or building,can not through the hill or oversize building )
Encode: Fixed code, soldering
Frequency:315 /433 MHz
Power Supply: 1 X 9V Battery
2.Switch reciever
Power Supply (Operating Voltage): DC 24V
Relay: 10A/250V AC, 10A/125V AC, 10A/30V DC, 10A/28V DC 10A 1V-250V
Work Voltage Range of Relay: AC 110-240V or DC 0-28V,AC/DC 1V-240V (Not receiver)
sensitivity:-105 dBm
Operating Temperature:-40'C~+80'C
Work model: Working mode:Momentary, Toggle(self-lock), Latching(inter-lock)(Change style by model Pin,momentary default)
Work model:
1.Toggle/Self-Lock: Press->On; Press again->Off
press one button for one time is working/ON .press the same button again is stop/OFF .(1 channel switch(receiver) need 1 button remote control (transmitter).
2.Latched/Inter-Lock: Press->On; Press other button->Off
press one button is working/ON ,press another button is stop/OFF . ( 1 channel switch( receiver) need 2 buttons remote control (transmitter).
Momentary/Jog: Press and hold->On; Release->Off
Keep pressing one button is working /ON. loosen your finger is stop/OFF .1 channel switch(receiver) need 1 button remote control (transmitter )
(Factory Original Setting is Momentary, or Change it by yourself.)
Decode: Learning code
Remote Control Removal and Add
Learn code to add remote control :
Connector switch to 12V ,Press switch learn button 1-3s，LED lighting,press the remote control button,till LED off.press the control button, the relay will be on and off.(it can hear it,compatible switch with controller ,after send order to you,usually not need learn control code)
Remove Remote control:
Connector switch to 12V,Press learning button for 8-10S,till LED Off.(Control Code deleted,controller can not control the switch relay)
Package:
1x Transmitter Remote Control (Battery include)
1 x 24V 2CH Switch Receiver (with Box)
