Remote Switch Feature:

 Wireless switch mainly used in lighting,LED,Fans.computer, electric doors, windows, lifting equipment, motor control, pumps, lifts control and security industry and other fields.Wireless switch Relay can Simplified circuit.Especial in home LED light fan,very convenient for Home electronics voltage 110V to220V，More convenient wiring combination.

Switch Specification:

Channel: 1 CH

Working Voltage: AC 110V-220V

Working Frequency: 315MHz

Max Current: 10A

Relay Load:  10A 1V-250V(AC,DC)

Work AC voltage:85V,110V,220V,250,85-250V,DC/AC 16V-84V

Power：<500W(Max),Suggest 0-200W to work.

Operating Temperature: -40'C~+80'C

Output State:   Momentary/Toggle/Latched (adjusted freely by the Jumper on the receiver.)

Receiver Sensitivity:  -105dBm

Code: Learning code

Switch work model sets (can change by you need):

 1.Self-lock/Toggle: Work model Pin （1+2）Connect

 2.Latched/Inter-Lock: Work model (2+3) Connect

 3.Momentary/Jog : Work model（123）All un-connect

Working ways:

1.Toggle/Self-Lock: Press->On; Press again->Off

 press one button for one time is working/ON .press the same button again is stop/OFF.(1 channel switch(receiver) need 1 button remote control (transmitter).

 2.Latched/Inter-Lock: Press->On; Press other button->Off

press one button is working/ON, press another button is stop/OFF.(1 channel switch(receiver) need 2 buttons remote control (transmitter).

3.Momentary/Jog: Press and hold->On; Release->Off

Keep pressing one button is working /ON. loosen your finger is stop/OFF. 1 channel switch(receiver) need 1 button remote control (transmitter).

Remote Control:

  Learn code to add remote control :

     Connector switch to 110V/220V ,Press switch learn button 1-3s，LED lighting,press the remote control button,till LED off.press the control button, the relay will be on and off.(it can hear it,compatible switch with controller ,after send order to you,usually not need learn control code)

   Remove Remote control:

 1 Connector switch to 110V/220V,Press learning button for 8s,till LED Off.(controller can not control the switch relay)

2 Press the learning button for about 8 seconds, the indicator light turns on to off, then the code you learned before will be deleted.The remote controller can not control the switch relay.

Package:

 1/2 X Remote control transmitter (Battery included)

 4 X     110V/220V Switch receiver witch protector box