Body Kit Plastic Sticker Graphic Set Kit
Team DC
White / Red
For Yamaha PW80 - All Years
Jianshe PY80 Coyote 80cc - Early MK1
High Quality Stickers using Genuine 3M for extra durability and to ensure a strong stick.
for fitting instructions to insure the best bond to your plastics please see our fitting guide below
Kit Includes:
1x Front Fender Sticker
1x Front Number Board Stickers
x2 Tank Stickers
x2 Tail side panel stickers
x1 rear Mudguard Sticker
We also sell the body kit to suit the bike please see our listings:
How to Install this graphics Kit:
Tools required- Heat gun or hair dryer, scissors and knife to trim stickers
Liquid or alcohol is not required to install this kit. Doing so will soak into the adhesive and cause sticking problems
1) Thoroughly clean your plastics, removing all old adhesive dirt, lints, oil etc. when done rinse with plain water and dry with a lint free cloth
2) Remove half of the backer liner and cut off. Line up bolt holes where liner is still attached
3) Place decal lightly onto plastics making sure bolt holes and edges are lined up properly. At this stand if the graphic has been mislaid you should be able to carefully lift it up and try again. Once you are happy with the placement start from the center and work your way to the edges pressing firmly to activate the adhesive and start the permanent fixture.
4) If the decal starts to wrinkle use the heat gun / hair dryer to soften and press the center of the wrinkle down to smooth it out. We recommend that you leave the bike inside and do not ride for 24hrs to let the adhesive to fully cure. After this use the heat gun to help help cure the adhesive further.
High Quality aftermarket part you can trust
From VMP- the experts in motorcycle parts
We have many other parts available for this bike, please our other listings