\\ Penn Line - Bowser E-6 Atlantic / Restored 100% //

Here is another restored loco. This is a Penn Line / Bowser, I say that because yrs. ago Bowser bought them out. This train was disassembled completely and then cleaned, replaced anything worn, and then built back up. As you can see in the photos the chassis was  completely done to include the motor.  The tender has a real coal load. I have a fixture I made to hold the chassis when done so I can run them to break them in without running on the track. This train as well all of them  I do ran for 15 min in each direction to ensure all rods and valve rods function correctly, as well as the motor. The only track time it has is about 4 feet to ensure proper electrical connection between the engine and tender. the paint is done with an air brush and clear coat is applied after the decals are set. I have a total of three of these im doing and this is the first two more will follow.

 If you have a question just ask, if your looking for cheep junk, this is not it. If you want quality then your in the right place, I build everything as if it were going in my own display cabinet.

Many of you may know about me from trains I've build and sold here, I've been off EBay for about a yr. due to personal reasons. I've been rebuilding and restoring vintage model trains for over 30 yrs. if you have a question, just ask. like I said I've been off eBay for a little bit, but I'm back now and building and restoring every day. check my feedback, also you can check my feedback on ram3636.