VELCRO® GENUINE BRAND PS14 SELF ADHESIVE STICK ON TAPE HOOK & LOOP STICKY STRIPS

·         The rubber adhesive based VELCRO® brand hook and loop fastener is a pressure sensitive adhesive system; the PS14 rubber solution applied to the back of the hook and loop tape, it bonds on contact and cures to its optimum strength in 24 hours to form a permanent fix on suitable substrates.

·         PS14 should be used at room temperature and is suitable for interior use only. The resin is ideally suited to low energy substrates, and can be used confidently on the following surfaces; Anodised Aluminium, Glass, Painted Wallboard, Plywood, Polyester, Stainless Steel, Formica (Polished side only) and Polyacrylic. With reservation VELCRO® brand PS14 adhesive can be used on; Polyethylene, Polypropylene, Cardboard and some Fabrics, however, bond strength is limited, the adhesive is not suitable for Vinyl. 

·         Durable PS14 rubber adhesive resin you can rely upon.

HOOK= The rough, scratchy side,       LOOP= The soft, fluffy side.        

·         Just peel off the backing paper and apply.

·         Available in Black or White.

·         Available in a choice of widths: 10mm - 20mm- 25mm

·          Available in a selection of lengths: 100mm - 200mm - 500mm - 1Metre - 2Metre - 5Metre - 10Metre - 25Metre

Product Description:

o    The rubber adhesive based Velcro® brand hook and loop fastener is a pressure sensitive adhesive system, the PS14 rubber solution is applied to the back of the hook and loop tape, it bonds on contact and cures to its optimum strength in 24 hours to form a permanent fix on suitable substrates.

o    PS14 should be used at room temperature and is suitable for interior use only, the resin is perfectly suited to low energy substrates, and can be used confidently on the following surfaces; Anodised Aluminium, Glass, Painted Wallboard, Plywood, Polyester, Stainless Steel, Formica (Polished side only) and Polyacrylic, with reservation Velcro® brand PS14 adhesive can be used on; Polyethylene, Polypropylene, Cardboard and some Fabrics, however bond strength is limited, the adhesive is not suitable for Vinyl.

Best/Recommended Substrates:

o    ALUMINIUM ANODISED,  GLASS, PAINTED WALLBOARD, PLYWOOD, POLYESTER, FORMICA (POLISHED SIDE), POLYACRYLIC AND STAINLESS STEEL

Good Substrates:

o    POLYETHYLENE, POLYPROPYLENE, CARDBOARD AND FABRICS