Your conservatory / Large Window is a very effective heat trap, the same could be said of roof lights in factories. As the sun blazes down on the roof, the temperature goes through it!

 

In recent summers mid-afternoon heat can be unbearable for you, your family or staff and even your plants. Until now, there was no effective solution to this problem.

 

Roller and pleated roof blinds provide shade, but can attract dust and insects, and are difficult to clean, whilst heat still penetrates the fabric, building up to unacceptable levels.

 

Heat reduction window film solves the problem.

 

Treatment with heat / solar energy reduction film prevents the heat from building up under polycarbonate or glass roofs, by reflecting the sun's heat away before it builds up in the room.

 

Immediate and dramatic reductions in internal daytime temperatures are achieved.

 

Easy DIY install window film.

Grey / Silver Color

Still allows some natural light

Professional Installer Grade Window Film

 

Click to see other Products

 

 

FITTING INSTRUCTIONS

 

Tools:

 

- knife
- Spray bottle containing water with a few drops of washing up liquid ‘Slip Solution’
- Squeegee

 

Method:

 

1) Thoroughly clean the window the film will be applied to.
2) Cut your film to size of the window, adding an extra 2cm to the width and height.
3) Remove the clear lining film from back of the window film and spray the adhesive back of the film, as well as your fingers, with the Slip Solution. Attach a piece of sticky tape to either side of the film at one corner and peel them apart.
4) Spray the glass with the Slip Solution.
5) Apply the adhesive side of the film onto the glass and slide into position.
6) Spray the face of the film with the Slip Solution and using a squeegee, push out all the soapy water from behind the film
7) Trim off any excess film using the knife