This is a great set of easy-reassembling LCD controller kit which is used to turn a bare LCD panel into a desktop/PC monitor. (Plug&play, no need soldering)
This kit is suitable for 1024*768 resolution LVDS 20-Pin signal port 1PCS CCFL backlight 60Hz screen
Compatible with the following screen model:
TM121XG-02L02
TM121XG-02L02D
TM121XG-02L03
TM121XG-02L10
TM121XG-02L10D
Come In Standby Mode When Not Input Signal
Standby Mode <1W
Working Power Adapter: DC 12V/3A-5A (need to buy extra)
(Screen size exceeds 17 inch, 5A power is recommended)
DC port: 2.5MM and 5.5MM inner+ outside-
HDMI Port Support Transform Audio Compatible With HDMI 1.3/1.4 HDCP 1.2
AV Compatible With PAL And NTSC (Only TV analog signals are supported)
USB supports video playback and firmware update
Video Input: HDMI VGA AV USB
Audio Input: HDMI PC-Audio
Audio Output: Speaker Connector (need to buy extra)
OSD: Brightness Contrast Auto Language And So On
Language: English Chinese
Board Size: 188mmX43mmX17mm
Package List:
1Pcs x TV controller board
1Pcs x Suitable LVDS cable (depend on your LCD panel model)
1Pcs x Suitable inverter (depend on your LCD panel)
1Pcs x Keyboard with cable
1Pcs x Remote control (Battery Not included)
Special Note: Except to the accessories included in the kit, you will need to prepare the power adapter and HDMI or VGA cable yourself.
Installation Steps:
1. Take away the old screen cable and the old inverter from the LCD panel.
2. Connect the new screen cable and the new inverter to your LCD panel. (Note the connection direction of the cable and the screen signal port. If the connection is wrong, the screen will not output signal)
3. Connect the controller board to the PC with HDMI or VGA signal cable.
4. Input power DC 12V 3A-5A. (Please use the standard LCD screen Power Adapter, other power input may not boot normally)
5. After all finishing the connecting, please do not rush to power on! No metal contact is allowed when powering on the controller board, otherwise short circuit may occur. Which may cause unavailability of the controller board.
Language settings, please participate in the photo below.
When the LCD screen is blurred. Please try adjusting the screen parameter ID
1. Please use the remote control press "MENU"- Press "1147"
2. Choose the Seventh item - choose the first and enter to adjust that!
3. Change this to "1 3 5 7 9 11" until color became normal.
Note: During the adjustment process, the screen may turn black. Please don't stop, keep pressing the left or right button!
The following are reference photos.