Belt Grinder Wheel Set  

CNC machined from Aluminium 6061

This is as good as it can get


Wheel Set Description 

We are proud to introduce our Newest Belt Grinder wheel set.
Set Includes:

  • One 130 mm diameter Drive Wheel: 
Drive wheel is CNC machined with 24 mm bore (H7 tolerance).  Bore is equipped with a 8 mm key way and a M6x20 mm set screw. Surface of wheel is truly crowned to insure belt won't jump off wheel . Please refer to the wheel's sketch for the exact wheel dimensions

  • Two x 50 mm diameter Idler Wheels: 
Each wheel is fitted with three 12 mm bearings. (Heavy duty 6201 RS bearings)  Bearings are rubber sealed to protect from dust. Bearings are placed back to back (best combination). A 10 mm wide standoff (sleeve) will raise the wheel of the mounting plate. This bearing combination is the best tested solution against bearing failure as it allow for tightening the mounting bolts without causing any axial force on the bearings (ball bearings should not bear lateral load)
  • One 100 mm diameter Track Wheel: Large Tracking wheels adds considerable control and stability of the sanding belt (from experience)
Each wheel is fitted with three 12 mm bearings. (Heavy duty 6201 RS bearings)  Bearings are rubber sealed to protect from dust. Bearings are placed back to back (best combination). A 10 mm wide standoff (sleeve) will raise the wheel of the mounting plate. This bearing combination is the best tested solution against bearing failure as it allow for tightening the mounting bolts without causing any axial force on the bearings (ball bearings should not bear lateral load)

YES we make Custom Orders

If you cannot find the wheel's shape/design or the dimensions that you are looking for, please contact us via eBay messaging system. Describe clearly your requirement and we shall reply promptly with a quote. We shall create an ebay listing to enable you purchase that item

Please Note: Due to machine setup time we have to place a minimum order quantity of 16 items of any type


Shipping

We understand that customers would like to receive their purchase as soon as possible. Therefore I provide postage service that is comparable -in speed- to local postal service. And to achieve that:

  • All orders are shipped using GLS or FedEx economy
  • Shipping is from Poland
  • All order are shipped the same working day if paid by 3 PM central European time 
  • From experience, in most cases; Items arrive in 3-6 work days to all EU countries 
  • From experience, in most cases; Items arrive in 7-20 work days to North America and Australia

Limitation of Liability 

In no event shall pulley-wheel be liable for any direct, indirect, punitive, incidental, special consequential damages, to property or life, whatsoever arising out of or connected with the use or misuse of its products.