NEW HX711 24 Bit Dual Channel Precision Sensor Module 100g Weight Sensor Module
HX711 Weighing Sensors Module

This module uses 24 high-precision A / D converter chip hx711, is designed for high-precision electronic scale and design, with two analog channel input, the internal integration of a gain programmable amplifier 128. Input circuit can be configured to provide an electrical bridge bridge voltage (such as pressure, weight) sensor model is an ideal high-precision, low-cost sampling front-end module• Two selectable differential input channels
• On-chip active low noise PGA with selectable gain of 32, 64 and 128
• On-chip power supply regulator for load-cell and ADC analog power supply
• On-chip oscillator requiring no external component with optional external crystal
• On-chip power-on-reset
• Simple digital control and serial interface: pin-driven controls, no programming needed
• Selectable 10SPS or 80SPS output data rate
• Simultaneous 50 and 60Hz supply rejection
• Current consumption including on-chip analog power supply regulator: normal operation < 1.5mA, power down < 1uA
• Operation supply voltage range: 2.6 ~ 5.5V
• Operation temperature range: -40 ~ +85℃

• 16 pin SOP-16 package
 
100g weight sensor module

Description:

  • 0-100g range silver tone aluminum wired weighing load cell, high accuracy, simple structure, easy installation.
  • Widely used for electronic scales and balance, material scales, jewelry scales and control system.

Specifications:

Product Name Weighing Load Cell
Rated Load 100g/0.22Lb
Ranted Output 1.0 +/-10 %mV/V
Non-Linearity 0.02%F.S.
Hysteresis 0.02%F.S.
Repeatability 0.02%F.S.
Zero Balance +/-2%F.S.
Temp Effect on Zero 0.025%F.S./10C
 Temp Effect on Zero Output 0.025%F.S./10C
Creep (30min) 0.03%F.S.
Input Impedance 1130+/-10 Ohm:1090+/-10 Ohm
Output Impedance 1000+/-10 Ohm
Insulation > 2000 Megohm / 50V DC 
Compensated Temperature Range -10C~40C
Operating Temperature Range -20C~60C
Safe Overload 150%F.S.
Ultimate Overload 300%F.S.
Input End Red+, Black-
Output End Blue+, White-
Recommended Excitation 10V
Maximum Excitation 15V
Load Cell Size 47 x 12 x 6mm / 1.9" x 0.47" x 0.24" (L*W*T)
Thead Hole Diameter 3mm /0.12"
Hole Center Distance 40 x 6 mm / 1.6" x 0.24" (L*Max.W)
Cable Length 8cm / 3.1"
Main Color Silver Tone
Material Aluminum Alloy
Weight 15g
Package included：
 
1PCS * HX711 Weighing Sensor Dual-Channel 24 Bit Precision AD Pressure Module
1PCS*100g Weight Sensor Module

We only accept payment through Paypal.
Items will go to post within 1-2 business days after payment confirmed.

If you can't receive the product within 2 months (60 days), please contact with us,we promise to payback 100% of your money.
We ensure our products work normally before post.If the products is broken before arrival to you,all you should do is taking a photo to show us our broken product.We promise to payback 100% of your money.

1. We ship to Worldwide.
2. We only ship to confirmed PAYPAL address; your PAYPAL address must match your Shipping address.
3. Any non-received items caused by invalid address registered on PayPal are not in our full refund or replacement policy. Shipping fee has including the local handing and packaging fee.
4. All the items will be shipping within 1-2 working days after receiving the payment, except some holidays.
5. We will not be responsible for any custom delay or tax, because transit time is highly depended and provided by postal Service.
6. If you have any problem, please contact us via message, we will reply message within 1-2 working days, please wait for patient.

DataCaciques