![Fluid 3D Workshop](https://cdn02.plentymarkets.com/5qtn8qfuk4ur/frontend/images/Fluid_3D_Workshop_Logo_280x79.png)
![1448 1448](https://cdn02.plentymarkets.com/5qtn8qfuk4ur/item/images/1448/full/BARO-25--A30KK-1.jpg)
![1448 1448](https://cdn02.plentymarkets.com/5qtn8qfuk4ur/item/images/1448/full/BARO-25--A30KK-2.jpg)
![1448 1448](https://cdn02.plentymarkets.com/5qtn8qfuk4ur/item/images/1448/full/RO-Size-Guide.jpg)
Precision cut high quality 200mm black round acrylic bases for mounting your miniatures.
These bases are available in thicknesses of 2mm & 3mm and are supplied in a convenient sprue (sheet) and simply need to be popped out when needed (and may need trimming slightly before use.) All our acrylic bases are shipped covered with a protective film to prevent scratches during transit and when stored - this film MUST be removed before use. When removing the film, we advise against the use of sharp tools, and recommend scratching at the edge gently with a finger nail. If in doubt, please message us for further advice.
If you cannot see a base size, shape, or colour to suite your needs, please send us a message - we manufacture all our bases in our workshop and are constantly expanding our product portfolio.
IMPORTANT: A note on thickness...
While we offer many of our bases in different thicknesses, care should be taken to choose the thickness most suitable to your needs. In particular, our 1mm acrylic is very soft and only suitable for gaming bases up to approximately 20mm. In general, we recommend 2mm thickness as a starting point unless you have specific needs. Please see below for information regarding suitability for basing miniatures at each thickness. This information should be used as a guide only...
1mm: | Suitable for gaming up to 20mm, display up to 40mm, may not be suitable over 40mm. |
2mm: | Suitable for gaming up to 60mm, display up to 130mm. |
3mm: | Suitable for gaming and display at any size. |
4mm: | Suitable for gaming and display at any size. |
And finally, while we use the best quality materials possible, due to the nature of manufacturing processes for our raw materials, the thickness of our acrylic is approximate and can vary by +/- 5%
Who & Why
Fluid 3D Workshop is a small business located in Tamworth, Staffordshire, United Kingdom. Originally providing 3D printing services to other small businesses and education, we have always had a very strong focus on quality and customer care and strive for complete satisfaction.
We now design, manufacture, and distribute our very own high quality products. This product range started primarily with basing for miniatures for both gaming and display. However with a background in model making and table-top gaming ourselves, we understand just how much terrain plays a part, and the lengths many hobbyists go to when creating display and gaming environments to scale.
With a shared passion for this attention to detail, we have spent over two years developing a highly compatible system for building incredible terrain with almost limitless variety at multiple scales.
In addition to this, we believe modding is an integral part of model making. Our terrain is engineered from a number of materials specially selected for their ease of cutting, drilling, gluing and crafting. What's more, we make all individual components available for purchase so our customers can design and build their own terrain kits exactly as they need.
We are very proud of this work and will continue to add new kits, components, and details to the system and hope you will enjoy making, modding, and painting it as much as we have developing it.
Fluid 3D Workshop Team
UN Climate Neutral Now
Climate Neutral Now is an initiative launched by the UN Climate Change in 2015, aiming at encouraging and supporting all levels of society to take climate action to achieve a climate neutral world by mid-century, as enshrined in the Paris Agreement adopted the same year.
As a responsible company, we are committed to ensuring we do our part to achieve climate neutrality. As with the UN Climate Change Initiative, we recognise the damage already caused and as such are already taking action to measure, reduce, and compensate greenhouse gas emissions generated by us and our supply chains.
Environment
In addition to our climate neutral commitment, we are also constantly reviewing our operation to minimise our direct impact on the environment. Some of the steps we have already taken include:
- Avoid use of product packaging where possible and when necessary, only use recycled materials and keep it to a minimum.
- Through careful selection, 95% of all our shipping packaging has already been recycled at least once, and is capable of being recycled again.
- Reduced the use of oil derived plastics with the aim to eliminate them altogether. All 3D printing uses PLA, a plant (starch) based polymer, which itself is biodegradable.
- Optimised our cutting processes to minimise waste material as much as possible.
This process is ongoing and we will continue to work towards the following goals:
- Replace remainder of shipping packaging with green alternatives.
- Restrict all shipping to couriers who can demonstrate their commitment to sustainability.
- Achieve near 0% use of oil derived products†
† In an ideal world, we would not use any oil derived products. However, we recognise at this time there are a number of technological limitations to achieve this, but we will still do everything we can to reduce oil derived products to an absolute minimum.
Payment
We only accept payment through eBay for our eBay listings. Orders will not be considered paid for until payment is made in full and has been verified by our ordering system which normally takes 1-2 hours, but in rare circumstances, can take up to 24 hours to complete.
Once you place an order, you are binding into a legal contract, so please do not buy unless you intend to complete the purchase. We will cancel all orders without notice after 7 days of payment not being received.
Processing
We are a small company with tens of thousands of products in our portfolio. We are unable to physically stock every single product so manufacture most products as needed.
Depending on our current order volume, manufacturing typically takes 1-3 working days, but can be as much as 7 days during peak periods.
Cancellations
To comply with eBay policy, we are unable to modify any order after it has been placed. If you need to change an order, it must first be cancelled allowing you to re-order the correct items.
To cancel an order, please follow eBay's standard process as soon as possible. If the option to cancel is no longer available, you should send us an eBay message requesting the cancellation.
Shipping
For efficiency, we process orders for dispatch in batches and ship in bulk at least twice per week.
FEES
Where shipping is shown as free, this will only apply to Mainland United Kingdom. Surcharges may apply to all offshore UK islands. If a listing specifically states that we ship to other destinations, then only that listing is available for non UK shipping and no other listing. Please contact us if you have any questions on surcharges before purchasing the item.
Where shipping fees are shown for a listing, including for International destinations, these fees have been pre-calculated based on estimated weight. All shipping fees have been carefully balanced with consideration for eBay's automatic postage discount feature. To ensure you do not pay more than necessary for shipping, you must use the eBay Shopping Basket for all items before paying.
Shipping fees are fixed and are not subject to negotiation.
DELIVERY ADDRESS
We only ship to the address passed to us by eBay. If you require a specific address to ship the order to, please make sure that you update this in eBay before confirming payment. We will not ship to any other address under any circumstances. If there is a mistake with the address provided to us, we will not be able to refund you and reserve the right to charge for your order to be resent.
INTERNATIONAL ORDERS
Import duties, taxes, and charges are not included in our pricing or shipping fees. These charges are the buyers responsibility. Please check with your country's customs office to determine what these additional costs will be prior to placing an order.
Returns
If you change your mind, or any of our products fall below the standard you would expect and you wish to return the item, you must notify us via eBay messaging within 60 days of receiving the item. We are happy to refund or exchange the item providing it is returned unused, undamaged, and in its original packaging with all accessories. Some items cannot be returned unless they are faulty, such as customised and made to order items.
If your item develops a fault within 60 days of delivery we will offer a refund, including postage costs or a replacement product. In some cases we may request that the original product is returned to us for assessment and verification of the fault before a refund is offered.
If your item develops a fault after 60 days but within the 12 month warranty period please contact us via eBay messaging and we will repair or replace it once the original product has been returned to us for assessment and verification of the fault.
If a product is returned as faulty but not found to have a manufacturing fault or if a fault has developed as a result of misuse, no product or shipping costs will be refunded.
Please allow time for shipping services to return items to us, 2 working days for us to investigate faults, and note that it can take 3-5 working days for any refund given to be shown in your account.
We always welcome any contact, so if you have something you would like to say, please do not hesitate to get in touch. While we aim to respond within 24 hours to all messages, we often manage it much sooner.
To comply with eBay policy, you must use eBay messaging unless we are permitted to, and make available alternative contact details.
eBay messaging to: fluid3dworkshop
If you prefer to send your message by snail mail, you will find our address in our Business Seller information.