Parameters:

Only 5V voltage receiver is supported, otherwise the module may be damaged. If the receiver and the servo are using a high voltage system, the module should be added with a step-down module.  

Features
- 1 channel servo signal input, control 2 way electronic switch
- 220V maximum controlled voltage
- 2 outputs
- Compatible with remote control devices of all brands without calibration  

Application range
- Remote control model rocket launch
- Remote control model smoke control
- Weapon system control like real machine
- Navigation control of the model aircraft
- Control of various remote switch systems  

Functional Description
■The remote switch remotely controls up to 2 electrical devices on the aircraft model via a switch channel on the remote control
■This device does not require calibration and can be accurately compatible with remote control devices of various brands.
■This device is powered by the receiver and is completely isolated from external power supply, externally powered, and only supplied to the controlled device.  

Typical application
1. Connect
Plug the signal input cable into an idle receiver channel that corresponds to a switch on the remote.
Connect the console switch to the device
2. Trigger
(Take the throttle channel as an example) Turn the throttle lever on the remote control to the full throttle and a relay to close (ie, the terminals are connected). Turn the throttle lever on the remote control to the half throttle, and the two relays are not closed (both are not connected). Turn the throttle lever on the remote control to the minimum throttle and the other relay to close (ie, the terminals are connected).