PMG - Specialised uPVC Cleaner!

This cleaner is designed to be used with PMG Paints. It cleans and activates the surface to help with longevity of our products.

For all spray paints please see our other listings.

Our one step cleaner helps degrease the spraying surface and helps with the longevity of the finish. If a surface is not cleaned prior to spraying, then adhesion may not be successful. 

How to Use with our PMG Paints

PMG Paint needs a minimum temperature of 15 degrees. If spraying in a colder environment warm up substrate and can before use.

Prepare the area by masking any unwanted areas neatly and clean thoroughly. 

Allow the cleaner to evaporate fully. 

(Always shake can well prior to use)

Spray a thin, even coat onto the desired area. 

Leave 5 to 10 minutes before any sanding or second coats. 

------------------------------------------------------------------------------------------------

Warning: 

- Highly Flammable liquid and vapour - NO SMOKING - Material and container must be disposed of as hazardous waste. - Harmful to aquatic organisms with long term effects - Harmful if inhaled - If it comes into contact with skin/hair wash immediately with water/shower - Use in a well-ventilated area - Wear suitable clothing and gloves - Store in upright position with lid tightly sealed.  

Store in a well-ventilated area away from heat, hot surfaces, open flames and other sources of ignition.

------------------------------------------------------------------------------------------------

This listing is for the ONE STEP CLEANER only. For paint products please see our other listings. 

(Please note, you may be supplied with a different bottle than photographed. These will always be the same, if not a larger size than selected.)