Power i-TIG 200T

  
   







SKU: PowerPlasma-102i



Product Description

The PowerPlasma 102i is designed for heavy duty plasma cutting service.  With up to 100 amps of cutting power, the original unit has proven its performance and reliability in industrial and fabrication settings since 2008.  The newest version has been redesigned for a more compact stature. The IGBT inverter design is reliably engineered to provide heavy duty service with a 60% duty cycle at maximum amps.  This is enough to sever metal up to 1 5/8" thick when needed.  For daily use, it works great for regularly cutting 1 1/4" thick plate metal, and when called upon, makes a clean cut up to 1 1/2".  The heavy duty Innotec iPT100 blow back torch features a Euro, quick connect central adapter for easy connection.  Priced around the price of some 40-50 amp plasma cutters on the market, this Everlast IGBT inverter plasma cutter clearly doesn't go slack on performance. This unit is featured standard with 1 phase 240V input. Optional voltages and 3 phase available.

PRODUCT EXTRAS

Features & Benefits: 
  • Easy starting with Blow Back Pilot arc allows easy cutting of rusty and painted metals
  • Cuts virtually any type of metal with ease
  • Simple to use torches with inexpensive service parts and consumables
  • Commercial/Industrial class, 60% Duty cycle at 100 amps
  • Clean, smooth cuts and improved consumable life with the new Italian designed iPT 100 torch
  • Blowback start starts arc without the need of High Frequency which can interfere with surrounding electronics
  • Pilot arc improves performance and cutting on dirty, painted, or rusted metals 
  • 3 Second pilot arc tip saver feature shuts down pilot arc after 3 seconds of contiuous operation if no cutting is present to prevent premature consumable wear
  • Adjustable post flow control up to 50 seconds to improve consumable and torch life
  • Front air pressure gauge allows quick verification of air pressure
  • Over Current and Duty Cycle protection indicates fault with a dedicated warning/diagnostic light, and shuts down output until condition is resolved
  • IGBT modules from Infineon (Siemens) improve reliability and performance while reducing overall weight
  • CNC socket for CNC use on plasma tables (machine torch optional)

WHAT'S INCLUDED

Standard Equipment: 
  • 15ft. Italian designed and patented iPT 100 torch with Euro quick-connect central adapter
  • Work clamp with 10ft. cable and DINSE connector
  • Air pressure regulator/water trap (Separate air dryer is required to reduce consumable wear and prevent torch damage)
  • Consumable starter kit
OPTION

Optional Equipment: 
  •  iPT 100 CNC torch
  • Welding cart
  • Consumable kit
RECOMMENDED USES
Recommended Areas of Use: 
  • Industrial Fabrication
  • Pipelines
  • Shipyards
  • Motorsports facilities
  • Repair shops
  • Rail Road maintenance
  • HVAC
  • Heavy Equipment Repair
  • Farm/Ranch
  • CNC
Recommended Metals: 
  • Steel
  • Stainless
  • Aluminum
  • Copper
  • Titanium
  • Nickel/Nickel alloys
  • Virtually any metal including cast iron
TECH SPECS
Type: 
IGBT
Voltage/phase: 
220/240 V 1 Phase
Output Amp/Volt Range: 

20-100A/88-120V

OCV: 

250V

Max Inrush ( I1MAX ) Amps: 
  • 220V 1 phase:  82A
Maximum Rated (I1EFF ) Input Amps: 

220V 1 phase: 64A

Duty Cycle At Rated Amps/Volts: 
  • 60% @ 100A/120V
  • 100% @ 80A/112V
Arc Start Type: 
Blow Back (Piston type)
PilotArc: 
Yes
Torch Type: 

Genuine Innotec iPT100

CNC Interface Port: 

Yes

Adjustable Post Flow Timer: 
No
Gouging: 
Yes
Recommended Cutting Air Pressure: 

70-75 psi

Recommended Compressor Capacity: 

8CFM @90 psi, 60-80 gallon tank

OK-to-Cut Indicator/Low Air pressure safety: 
No

NOTES


Notes: 

A separate air dryer must be provided by the customer to prevent torch damage, and excessive consumable wear. The unit includes a regulator/water trap, but is not designed to remove all water or moisture. Contact Everlast directly for Special orders with alternative voltages and phases. Additional charges may apply. Contact Everlast directly to order special units. Allow 6-8 weeks for special order deliveries.
MINIMUM/MAXIMUM

  • Up to 1 1/4" daily use @ 15-20 ipm
  • Up to 1 1/2" clean cut @ 8-12 ipm
  • Up to 1 5/8" severance cut @ 3-5 ipm
  • Pierce up to 3/4-7/8"

    • Plasma cutting capacity is affected by several factors.  Ideal cutting conditions require dry air, new consumables, proper air pressure etc.   Quality of cut depends upon consumable orifice size, standoff height,  and travel speed.










Returns For returns, contact must be made within72 hours of delivery so an RMA number is issued. If there is damage, we can help file a damage claim immediately.

DOA items: In the event you receive a non working unit , we will exchange it free of charge.

Items returned must be in an GOOD condition. We will inspect all returns before accepting the package. We will not accept packages that have missing parts, damages, and packages that have not been approved for return by our initial contact or packages missing an RMA number. These packages will be refused and sent back to YOU at your cost.
Shipping Information: 1- We have an onsite professional shipping and packaging department and adhere to all shipping guidelines.
2- We will try to ship orders as soon as possible after payment approval unless otherwise stated in description. NOTE: Since there are many ways we offer our products, on rare occasions there is a chance an item may go out of stock that we have listed and sold on eBay. We will do our best to expedite backordered items as soon as possible.
3- Please provide a physical address. We will not ship to a PO Box.
4- Shipping charges are for the (48) Continental United States only.
5- We don’t ship to Canada
6- We charge CA tax on all orders 9.5%
7- If you pay via PayPal, shipping will be to your confirmed address only
8- Shipping to AK, HI and PR is more. please email for price.
Contact Operating Hours:
Monday through Friday: 9AM to 5PM PSTSaturday: 11AM to 4PM (PST)