|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Attention:
Durability may vary depending on the thickness of the polymethylene oil you use
Operation steps:
1. Apply a thin layer of primer and cure it under UV / LED lamp for 60 ~ 90 seconds (the primer will not dry completely, and sticky primer can make the color glue adhere better)
2. Select the appropriate nail membrane, and squeeze appropriate amount of crystal extender glue on the nail membrane at the tail (the glue belongs to solid extrusion process, which is difficult and belongs to normal phenomenon)
3. Dip the brush with a proper amount of cleaning solution (it is easier to push it away with clean water)
4. Use a brush to spread the glue evenly on the nail surface, and pay attention to the edge wrapping
5. Print the nail stick coated with extender on the nail and press it gently until it is cured under UV / LED lamp for 60 ~ 90 seconds (if the coating is too thick, it is not easy to cure, if it is too thin, it is easy to break, it must be uniform)
6. After the lamp is finished, gently swing left and right to remove the nail membrane
7. Cut to the required length with a pair of scissors (nail clippers), and trim the desired nail shape with rubbing strip
8. Coating, curing under UV / LED lamp for 90-120 seconds. (the brightness of the seal will be greatly improved after 30 seconds of the seal test.)
Specifics:
Package:
6X 15ML Extension
1X 30ML Nail polish
1X 10ML bottom glue
1X 10ML No wash seal layer
1X Dual use extension gel phototherapy pen
1X Nail polish board
1X 100PCS nails
1X 100PCS paper tray
2X Nail powder
Item Specifics | |
---|---|
Brand : | Unbranded |
Type : | Nail Art Kits |
Sticker Type : | French Tip |
Theme : | Nail Art Tool |
Effect : | Shiny |
(appx 7- 30 days,No Tracking)
Shop Category |
Pro Poly Nail Art French Extension Gel Kit Nail Builder Enhancement Manicure Set
Attention: Durability may vary depending on the thickness of the polymethylene oil you use Operation steps: 1. Apply a thin layer of primer and cure it under UV / LED lamp for 60 ~ 90 seconds (the primer will not dry completely, and sticky primer can make the color glue adhere better) 2. Select the appropriate nail membrane, and squeeze appropriate amount of crystal extender glue on the nail membrane at the tail (the glue belongs to solid extrusion process, which is difficult and belongs to normal phenomenon) 3. Dip the brush with a proper amount of cleaning solution (it is easier to push it away with clean water) 4. Use a brush to spread the glue evenly on the nail surface, and pay attention to the edge wrapping 5. Print the nail stick coated with extender on the nail and press it gently until it is cured under UV / LED lamp for 60 ~ 90 seconds (if the coating is too thick, it is not easy to cure, if it is too thin, it is easy to break, it must be uniform) 6. After the lamp is finished, gently swing left and right to remove the nail membrane 7. Cut to the required length with a pair of scissors (nail clippers), and trim the desired nail shape with rubbing strip 8. Coating, curing under UV / LED lamp for 90-120 seconds. (the brightness of the seal will be greatly improved after 30 seconds of the seal test.)
Specifics:
Package: 6X 15ML Extension
Payment
Shipping
(appx 7- 30 days,No Tracking)
Return Policy
About Item
Customer Service&Feedback
|