This is a great set of easy-reassembling LCD controller kit which is used to turn a bare LCD panel into a desktop/PC monitor. (Plug&play, no need soldering)
This kit is suitable for 1366*768 resolution LVDS 40-Pin signal port 60Hz screen
Compatible with the following screen model:
LP140WH4 (TL)(A1)
LP140WH4 (TL)(A2)
LP140WH4 (TL)(B1)
LP140WH4 (TL)(B2)
LP140WH4 (TL)(C1)
LP140WH4 (TL)(D1)
LP140WH4 (TL)(N1)
LP140WH4 (TL)(N2)
LP140WH4 (TL)(P1)
LP140WH4 (TL)(P2)
LP140WH4 (TL)(P3)
Come In Standby Mode When Not Input Signal
Standby Mode <1W
Working Power Adapter: DC 12V/3A-5A (need to buy extra)
(Screen size exceeds 17 inch, 5A power is recommended)
DC port: 2.5MM and 5.5MM inner+ outside-
HDMI Port Support Transform Audio Compatible With HDMI 1.3/1.4 HDCP 1.2
AV Compatible With PAL And NTSC (Only TV analog signals are supported)
USB supports video playback and firmware update
Video Input: HDMI VGA AV USB
Audio Input: HDMI PC-Audio
Audio Output: Speaker Connector (need to buy extra)
OSD: Brightness Contrast Auto Language And So On
Language: English Chinese
Board Size: 188mmX43mmX17mm
Package List:
1Pcs x TV controller board
1Pcs x LVDS signal cable
1Pcs x Keyboard with cable
1Pcs x Remote control (Battery Not included)
Special Note: Except to the accessories included in the kit, you will need to prepare the power adapter and HDMI or VGA cable yourself.
Installation Steps:
1. Take away the old screen cable from the LCD panel.
2. Connect the new screen cable to your LCD panel. (Note the connector contact direction)
3. Connect the controller board to the PC with HDMI or VGA signal cable.
4. Input power DC 12V-3A or 5A. (Please use the standard LCD screen power supply, other power input may not boot normally)
5. After all finishing the connecting, please do not rush to power on! No metal contact is allowed when powering on the controller board, otherwise short circuit may occur. which may cause unavailability of the controller board.
Language settings, please participate in the photo below.
When the LCD screen is blurred. Please try adjusting the screen parameter ID
1. Please use the remote control press "MENU"- Press "1147"
2. Choose the Seventh item - choose the first and enter to adjust that!
3. Change this to "1 3 5 7 9 11" until color became normal.
Note: During the adjustment process, the screen may turn black. Please don't stop, keep pressing the left or right button!
The following are reference photos.