Description
STM32 Closed Loop 57 Stepper Motor Driver 6.35D Shaft Kit For 3D Printing Servo Stepping Mechaduino
Product Parameters:
- VCC: 12-30V (reference motor working voltage 24V)
- GND: power ground
- CLK: pulse input
- DIR: direction control (ground, reverse rotation)
- ENA: enable signal
- COM: Connect to 3.3V, common anode
- P2: one phase on each side of motor cable
Applicable Motor Parameters:
- Product name: 57 two-phase stepper motor
- Maximum speed: 1000 rpm (recommended load within 600 rpm)
- Step angle: 1.8°
- Static moment: 1.2N.m
- Driving voltage: 24V
- Motor length: 56mm
- Rated current: 3A
- Phase position: 2.5mH
- Rotor inertia: 300g.cm²
- Phase resistance: 0.9Ω
- Control method: pulse control
- Shaft length: 22mm
Application Scenario:
1. Fine closed-loop 3D printing
2. Optical precision aiming (laser, telescope, camera gimbal, etc.)
3. Speed cycle record player
4. Force feedback/impedance control robot
5. Force feedback of game controller
6. Adjustable mechanical impedance: virtual spring, damper, etc.
7. Electric transmission device between two axes such as CNC machine tool
8. Gravity elimination (for example: offset gravity torque on the robot arm, etc.)
9. Load detection and characterization (used as a balance)
10. Paper towel/TP dispenser
11. Variable load (brake, generator, etc.)
12. Valve control (automatic garden hose, etc.)
Package Included:
- 1 x Motor Driver Board Kit
Note: The product is installed and tested by professionals, and you can use it normally when you receive goods.
Product Parameters:
- VCC: 12-30V (reference motor working voltage 24V)
- GND: power ground
- CLK: pulse input
- DIR: direction control (ground, reverse rotation)
- ENA: enable signal
- COM: Connect to 3.3V, common anode
- P2: one phase on each side of motor cable
Applicable Motor Parameters:
- Product name: 57 two-phase stepper motor
- Maximum speed: 1000 rpm (recommended load within 600 rpm)
- Step angle: 1.8°
- Static moment: 1.2N.m
- Driving voltage: 24V
- Motor length: 56mm
- Rated current: 3A
- Phase position: 2.5mH
- Rotor inertia: 300g.cm²
- Phase resistance: 0.9Ω
- Control method: pulse control
- Shaft length: 22mm
Application Scenario:
1. Fine closed-loop 3D printing
2. Optical precision aiming (laser, telescope, camera gimbal, etc.)
3. Speed cycle record player
4. Force feedback/impedance control robot
5. Force feedback of game controller
6. Adjustable mechanical impedance: virtual spring, damper, etc.
7. Electric transmission device between two axes such as CNC machine tool
8. Gravity elimination (for example: offset gravity torque on the robot arm, etc.)
9. Load detection and characterization (used as a balance)
10. Paper towel/TP dispenser
11. Variable load (brake, generator, etc.)
12. Valve control (automatic garden hose, etc.)
Package Included:
- 1 x Motor Driver Board Kit
Note: The product is installed and tested by professionals, and you can use it normally when you receive goods.
Payment Terms
1.We accept PayPal only.
2.All major credit cards are accepted through secure payment processor PayPal.
3.Payment must be received within 7 business days of auction closing.
4.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
2.All major credit cards are accepted through secure payment processor PayPal.
3.Payment must be received within 7 business days of auction closing.
4.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
Shipping Terms
- For remote regions, we will charge your extra shipping costs. Usually it cost about 35USD-50USD. We will contact you after your payment. Thanks for your understanding.
Return Terms
1. If you receive defective item, please kindly notify us within 14 days. We will guide you the returning instruction for replacement or refund.
2. If you purchased in improper condition, please NOTE that the sipping and handling fee will not be refund, all return shipping fee should paid by the buyer unless item DOA.
3. We reserve the right to refuse any returns for objective reasons.
2. If you purchased in improper condition, please NOTE that the sipping and handling fee will not be refund, all return shipping fee should paid by the buyer unless item DOA.
3. We reserve the right to refuse any returns for objective reasons.
Custom Duties & Taxes
1. Import duties, taxes, and charges are not included in the item price or postage cost. These charges are the buyer's responsibility.
2. Avoiding some unnecessary trouble, please check with your country's customs office to inform us what we should declare its value before shipping.
2. Avoiding some unnecessary trouble, please check with your country's customs office to inform us what we should declare its value before shipping.
Feedback
1. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
2. If you are satisfied with the product you received, please kindly leave us a positive feedback and 5 star DSR. If there is any problem of your order, please feel free to contact us firstly, we are responsible and credible seller, will follow it for you asap.
2. If you are satisfied with the product you received, please kindly leave us a positive feedback and 5 star DSR. If there is any problem of your order, please feel free to contact us firstly, we are responsible and credible seller, will follow it for you asap.
On Aug-12-20 at 00:20:27 PDT, seller added the following information: