Kings Domin8r Xtreme 9" 4WD LED Driving Lights (Pair) + Smart Wiring Harness Kit

Kings Domin8r 9” LED Driving Lights 
Quantity: 1

Plug N Play Smart Wiring Harness Kit
Quantity: 1

 

KINGS DOMIN8R 9” LED DRIVING LIGHTS (PAIR)

 

SERIOUSLY IMPRESSIVE PERFORMANCE
Kings Domin8r 9” LED Driving Lights produce a lab-proven 1 Lux @ 895m – that’s enough light to read a newspaper at a distance of 895m! They also produce a thumping 15,464 lumens, which translates to an incredible real-world flood of light directly in front of your vehicle – just as important as being able to see right down the middle of a long straight road.

HIGH-PERFORMANCE LEDS
That type of performance is thanks to the fact these lights are fitted with 28 high-performance LEDs and a new generation reflector cup with enhanced reflection angle to make the most of the light being produced.

But performance isn’t the whole story – because we’ve also made these lights INSANELY tough too! You get a pair of 3mm re-inforced folded-steel brackets with four alignment bolts per light, so that once you’ve fitted and adjusted your driving lights, they stay adjusted.

THE STRENGTH DOESN’T STOP THERE
Then add in a diecast aluminium body with in-built passive cooling for component longevity, a polycarbonate lens, and an IP68 rating that means these lights will run under water at a depth of 1m for 30min!, and you can see why we say they’re built TOUGH!

These high-tech lights feature over & under-voltage protection as well as an ability to run on 12v and 24v, so they’re perfect for just about machine from the smallest car to the biggest tractor.

LAB-PROVEN PERFORMANCE
Like all Adventure Kings driving lights and lightbars, the 9inch Domin8r Xtreme Driving Lights are tested in a NATA-accredited Australian lab and proven to produce a genuine 1 lux @ 895m and 15,464 lumens per pair.

LEDs 28 x high-performance LEDs
Lumens 15,464 lumens (pair)
Lux 1 lux @ 895m
Amp Draw 16.82 @ 14.4V(pair)
Power Draw 242w (pair)
IP Protection IP68
Color Temp 7803k
Voltage Compatibility 12 & 24V
Housing Die-Cast Aluminium
Connection Waterproof Deutsche recessed into light body
Mounting 3mm folded-steel with 4 adjustment bolts
Dimensions (with brackets) 245mm (H) x 227mm (W) x 95mm (D)
Weight 2.25kg (ea)
Warranty 1 year

KINGS SMART HARNESS | PLUG N PLAY SPOTLIGHT WIRING HARNESS | Easy DIY Install | Deutsch plugs

EASY DIY INSTALL
Take the stress out of wiring Driving Lights or LED Light Bars to your vehicle. The Adventure Kings Plug N Play Wiring Harness solves all your wiring needs in one easy to install kit.

Solving the age-old problem of trying to figure out if your vehicle is positively or negatively switched, the Plug N Play does the work for you!
PLUGS STRAIGHT
Directing power where it is needed straight out of the box, the kit allows you to have your lights installed and up & running in no time.

HEAVY-DUTY 12AWG CABLE
Utilising thick 12AWG (3.31mm²) wire, the Plug N play will efficiently deliver power into your Adventure Kings Driving Lights or LED Light Bar – allowing you to take full advantage of the HUGE amount of light they emit.
IN-LINE BLADE FUSE & WATERPROOF DEUTSCH PLUGS
Protected by a replaceable in-line blade fuse along with weather and heat resistant cable protectors, which easily connect directly to your lights using waterproof Deutsch plugs. This wiring kit was designed for the rough & tough of Australian 4WDing, from scorching deserts to treacherous water crossings.

FLUSH MOUNTED SWITCH
Connecting to a flush mounted switch, which conveniently mounts inside the cab, you’ll have full control of your lights right from the driver’s seat.
INCLUDES
Wiring Harness40A RelayBacklit LED SwitchIn-Line Fuse2 to 1 Deutsch Splitter CableH4 & HB3 AdaptersM8 Terminals
PLEASE NOTE
Included in the kit are HB3 & H4 headlight adapters to suit most popular makes & models.

 

Live wire gauge: 12AWG
Relay to Deutsch plug: 2700mm
Relay to trigger (headlight): 2000mm
Relay to switch: 2650mm
Single to Double Splitter: 1000mm
Fuse: 25A
Relay: 40A