Belt Grinder Wheel Set  

CNC machined Polyacetal (High wear resistance)


Wheel Set Description 

  • No difference in performance between Acetal sets and Aluminum sets. Polyacetal (Delrin) is a well know engineering plastic famous for it's abrasion resistance
  • Because of the method we use in machining these wheels we can guaranteed a runout less than 0.05 mm (no vibration)
  • Difference in the price between our aluminum sets and Delrin sets is derived from difference in material cost and not from difference in quality or performance

Set Includes:

  • One 101.6 mm diameter Drive Wheel: 
Drive wheel is CNC machined with 24 mm bore (H7 tolerance).  Bore is equipped with a 8 mm key way and a M5x16 mm set screw. Surface of wheel is truly crowned to insure belt won't jump off wheel . Please refer to the wheel's sketch for the exact wheel dimensions

  • Two x 50.8 mm diameter Idler Wheels: 
Each wheel is fitted with three 12 mm bearings. (Heavy duty 6201 RS bearings)  Bearings are rubber sealed to protect from dust. Bearings are placed back to back (best combination). A 10 mm wide standoff (sleeve) will raise the wheel of the mounting plate. This bearing combination is the best tested solution against bearing failure as it allow for tightening the mounting bolts without causing any axial force on the bearings (ball bearings should not bear lateral load)
  • One 76.2 mm diameter Track Wheel: 
Each wheel is fitted with three 12 mm bearings. (Heavy duty 6201 RS bearings)  Bearings are rubber sealed to protect from dust. Bearings are placed back to back (best combination). A 10 mm wide standoff (sleeve) will raise the wheel of the mounting plate. This bearing combination is the best tested solution against bearing failure as it allow for tightening the mounting bolts without causing any axial force on the bearings (ball bearings should not bear lateral load)

Shipping

We understand that customers would like to receive their purchase as soon as possible. Therefore I provide postage service that is comparable -in speed- to local postal service. And to achieve that:

  • All orders are shipped using Priority Mail
  • All order are shipped the same working day if paid by 3 PM central European time 
  • From experience, in most cases; Items arrive in 3-6 work days to all EU countries 
  • From experience, in most cases; Items arrive in 7-20 work days to North America and Australia

Limitation of Liability 

In no event shall pulley-wheel be liable for any direct, indirect, punitive, incidental, special consequential damages, to property or life, whatsoever arising out of or connected with the use or misuse of its products.