|
|
Stereo MIC DC/DV Dedicated Microphone
PL-MIC02
with 3.5mm Audio Plug for Canon Nikon Digital Camera & Video Camcorder |
| Features: |
|
1. The microphone can be used with digital cameras & video camcorders with 3.5mm MIC Jack, and can be used with the following cameras by hot shoe directly:
Canon EOS 1DX III / 1D Mark II, 7DII / 6D II / 5D Mark IV / 5D Mark III, 90D / 80D / 70D / 800D / 750D / 700D; R6 / R5 / R1 / R / RP; Nikon D6 / D5 / D4S,
D850 / D810 / D800 / D750 / D7200 / D5500 / D5300 / D3500 / D3300; Z7 II / Z7 / Z6 II / Z6 / Z5 / Z50; Sony a9 II / a9 / a7 IV / a7 III / a7s III / a7R III /
a6600 / a6500 / a6400. 2. The stereo microphone uses two stereo electret capacitor pickups, two separate signal amplification circuits, and acoustic interference tube technology, have good sensitivity and high directivity, pickup effect of long-distance and excellent directivity can easily be obtained. 3. The stereo MIC uses multi-level signal amplification circuit and noise reduction circuit, the output impedance of 500 ohms, suitable for most cameras and camcorders; providing low-cut and sensitivity enhancements to meet the requirements of different occasions; low-cut can effectively reduce wind noise. 4. Using one AA battery, with excellent standby time, while providing a low voltage LED alerts; Metal materials cavity, not only lightweight, rugged, but also conducive to high-frequency sound filtering of electromagnetic waves and enhancement of high frequency sounds. 5. Unique removable rubber buffers can effectively reduce the noise caused by vibration, providing ± 30 ° tilt adjustment; cold foot using a large lock nut with built-in 1/4 " copper nut; High-density sponge, weaved signal cable and gold-plated audio output plug, can effectively reduce sound transmission noise. |
| Note: |
|
1. Low-cut design to reduce wind noise outdoors, but
may reduce low frequency sound effects as well; 2. When sensitivity switch to +10 dB, it will enhance the sound effects, but may increase the noise as well; 3. When recording, please do not operate the switch or touch the microphone, do not move it vigorously, otherwise, the noise will be recorded; 4. When recording, keep the microphone switch vertical to the ground to ensure pickup heart-shaped for better sound effects; 5. When use and storage, please be careful to avoid wet, electrostatic, magnetic, hot or cold, which will affect the life of the product and the use effect. |
| Usage: |
|
1. Remove the microphone from the shock absorber,
rotate and open the rear, install one AA-1.5V fully charged battery according to the positive and negative prompts; 2. Install the microphone back to the shock absorber, attach to the camera hot shoe and adjust the microphone length according to the length of the lens; 3. Insert the plug properly into MIC hole of camera or DV; 4. Turn on the microphone first, and then the camera / DV power, set in video mode to start work; 5. When recording, keep the microphone switch vertical to the ground, do not adjust the switch during working; 6. After use, turn off the power, remove the battery, store the microphone in a dry place under room temperature. |
| Specifications: |
|
Pickup type: Stereo electret capacitance x 2 Frequency response: 50Hz-16KHz Sensitivity:-45dB Enhance: +10 dB Low-cut frequency: 60Hz 10dB (otc) Output impedance: 500Ω (AT 1KHz) SNR: 76dB Maximum load SPL: 120dB Battery type: AA battery Cable length: 33cm Plug: Gold-plated 3.5mm in diameter Dimensions (excluding sponge): 200 x 42 x 65mm Weight: about 120g |
| Package Including: |
|
1 x iShoot DC/DV Stereo Microphone PL-MIC02 (The other items in the photos not listed here are for illustrating only, not included) |
|
|
