Miniature Serial-To-Internet Module XT-Pico-XXL: Measuring
only 2x3cm (0.78"x1.18"), the XT-Pico–XXL module features two bus
systems that are user switchable to support any two out of the following
four serial interfaces: RS232, RS485, I2C or SPI. Alternatively the
buses can also be used as digital TTL inputs or outputs. A Ethernet
connection makes those serial interfaces or the digital I/O available
via the Internet. The module comes per-programmed with all the necessary
Internet protocols, such as: IP, TCP, UDP, FTP, TFTP, ICMP, ARP, SNMP,
LPR, DHCP, BOOTP, DNS, TELNET, HTML, http, DYNDNS, SMTP, POP3, SYSLOG
and SSL(in preparation). POE (Power over Ethernet) can be easily
implemented into your design as all necessary connections are available
on the module. The module also supports additional peripheral functions
such as a 4-bit or SPI (Serial peripheral bus) LCD display and SD card
holder. An Evaluation Kit
is available that features physical interface connectors for Ethernet,
2x RS232/RS485, a SPI connected LCD display, Power over Ethernet module ,
and a SD card socket. Miniature Serial-To-Internet Module Power supply: - 3.3Volt / ca. 170 mA
- POE Power-Over-Ethernet (necessary pins are available)
Dimensions Ethernet (MDIX) RS232 (TTL) - Data rate : up to 1MBaud
- Data bits: 7-8Bit
- Parity: Odd,Even,Mark,Space,None
- Signals: TXD, RXD, RTS, CTS, DSR, DTR ,DCD,RI, GND
RS485 (TTL) - Data rate : up to 1MBaud
- Data bits: 7-8Bit
- Parity: Odd,Even,Mark,Space,None
- Signals: TXD, RXD,RS485-RW
I2C (TTL) - Data rate : up to 400KHz
- Data bits: 8Bit:
- MasterMode
- Signals: SLC,SDA
SPI (TTL) - Data rate : 25MBit
- Data bits: 8-16Bit
- Mode: Master/Slave - Mode
- Signals: SCK,SS,MISO,MOSI
TTL-IO (TTL) - 7/8 TTL - IO
- Input / Output
Supported protocols - IP,
TCP, UDP, FTP, TFTP, ICMP, ARP, SNMP, LPR, DHCP, BOOTP, DNS, TELNET,
HTML, http, DYNDNS, SMTP, POP3, SYSLOG, SSL(in preparation)
Emulations and functions - Modem Emulation
- Connect-On-Data
- Auto-Connect
- Tunnel-Mode
- DYNDNS-Client
- FTP-Server
- LPR-Server
- I2C - Master
- SPI - Master / Slave
- TTL - IO
- 20KB Flashdrive
- Flash-File-System
- SD- und DF-CARD
- 4bit- und SPI - DISPLAY
- E-Mail - Client
- TCP/UDP -Client
- TCP/UDP -Server
- SYSLOG-Client
|