Pico Serial-To-Internet Module: RS232/485, SPI, I2C, TTL


XT-Pico-XXL
Pico Serial-To-Internet Module: RS232/485, SPI, I2C, TTL


Miniature Serial-To-Internet Module XT-Pico-XXL:

Measuring only 2x3cm (0.78"x1.18"), the XT-Pico–XXL module features two bus systems that are user switchable to support any two out of the following four serial interfaces: RS232, RS485, I2C or SPI. Alternatively the buses can also be used as digital TTL inputs or outputs. A Ethernet connection makes those serial interfaces or the digital I/O available via the Internet. The module comes per-programmed with all the necessary Internet protocols, such as: IP, TCP, UDP, FTP, TFTP, ICMP, ARP, SNMP, LPR, DHCP, BOOTP, DNS, TELNET, HTML, http, DYNDNS, SMTP, POP3, SYSLOG and SSL(in preparation). POE (Power over Ethernet) can be easily implemented into your design as all necessary connections are available on the module. The module also supports additional peripheral functions such as a 4-bit or SPI (Serial peripheral bus) LCD display and SD card holder.

An Evaluation Kit is available that features physical interface connectors for Ethernet, 2x RS232/RS485, a SPI connected LCD display, Power over Ethernet module , and a SD card socket.

Miniature Serial-To-Internet Module Power supply:

  • 3.3Volt / ca. 170 mA
  • POE Power-Over-Ethernet (necessary pins are available)
Dimensions
  • 22 x 32 mm
Ethernet (MDIX)
  • Ethernet 10/100Mbit RJ45
RS232 (TTL)
  • Data rate : up to 1MBaud
  • Data bits: 7-8Bit
  • Parity: Odd,Even,Mark,Space,None
  • Signals: TXD, RXD, RTS, CTS, DSR, DTR ,DCD,RI, GND
RS485 (TTL)
  • Data rate : up to 1MBaud
  • Data bits: 7-8Bit
  • Parity: Odd,Even,Mark,Space,None
  • Signals: TXD, RXD,RS485-RW
I2C (TTL)
  • Data rate : up to 400KHz
  • Data bits: 8Bit:
  • MasterMode
  • Signals: SLC,SDA
SPI (TTL)
  • Data rate : 25MBit
  • Data bits: 8-16Bit
  • Mode: Master/Slave - Mode
  • Signals: SCK,SS,MISO,MOSI
TTL-IO (TTL)
  • 7/8 TTL - IO
  • Input / Output
Supported protocols
  • IP, TCP, UDP, FTP, TFTP, ICMP, ARP, SNMP, LPR, DHCP, BOOTP, DNS, TELNET, HTML, http, DYNDNS, SMTP, POP3, SYSLOG, SSL(in preparation)
Emulations and functions
  • Modem Emulation
  • Connect-On-Data
  • Auto-Connect
  • Tunnel-Mode
  • DYNDNS-Client
  • FTP-Server
  • LPR-Server
  • I2C - Master
  • SPI - Master / Slave
  • TTL - IO
  • 20KB Flashdrive
  • Flash-File-System
  • SD- und DF-CARD
  • 4bit- und SPI - DISPLAY
  • E-Mail - Client
  • TCP/UDP -Client
  • TCP/UDP -Server
  • SYSLOG-Client