Product Description
ALPHA ADHESIVE DUNLOP THIXOFIX CONTACT ADHESIVE
1 LITRE TIN
THIXOFIX Thixotropic Toluene Free Contact Adhesive
Description
Alpha Thixofix Contact Adhesive has been developed for the specific aim of making
simple the bonding of laminated plastics to wood and other substrates, whilst maintaining
the well proven efficiency of ordinary contact adhesives.
EASE OF USE
The following application characteristics of Thixofix make this product simple to use.
* Thixofix is thixotropic. It is a gel, similar to non-drip paint, so it spreads like butter. It
does not spill and cuts out the mess normally associated with ordinary contact
adhesives.
* When bonding normal sized sheets of laminated plastics, the unique "slideability" of
Thixofix allows the accurate positioning of materials. For large sheets of laminate use
Trade Formula Thixofix.
* A free plastic spreader is supplied with each purchase.
Application
Alpha Thixofix was primarily manufactured for bonding laminated plastics to wood,
hardboard, chipboard, etc.
Thixofix is a very versatile adhesive and will bond laminated plastics, rigid PVC, cork,
rubber, leather, fabrics, wood, painted and unpainted metal, hardboard, plaster,
plasterboard, chipboard, etc.
Technical Data
Coverage per litre: 2.5 - 3 sq metres. Coverage reduces on absorbent surfaces.
Minimum Open Joint 10-15 minutes depending on temperature and absorbency of
Time: materials. Do not bond until both surfaces are "touch dry".
Cleaner: T 559 (TF)
Heat Resistance 70°C
Flash Point - 5°C
Method of use
Surfaces to be bonded must be clean, dry and free from dust, oil or grease. Do not stir
the adhesive. The materials to be bonded should be dry and free from dust, grit, oil and
grease.
On absorbent surfaces, such as plywood, hardboard and plasterboard, a primer coat of
Thixofix may be necessary.
Firstly, hold the Alpha spreader UPRIGHT and spread a uniform coat of adhesive over
BOTH surfaces to be bonded. This will help to ensure the correct amount of adhesive is
applied. A useful tip when using the spreader is to ensure that the ridges of adhesive run
vertically on one surface and horizontally on the other. Take special care that all edges
are properly coated with adhesive.
Secondly, allow the Thixofix to become "touch dry", (normally this will be 10-15 minutes,
although this can be longer in cold, damp conditions), but no longer than 25 minutes.
Another useful tip; the easiest way to establish whether the adhesive is in the correct
condition for bonding, is by touching the adhesive surface lightly with the knuckles.
Check different parts of the coated surfaces, particularly the area last coated. Check that
the adhesive DOES NOT transfer to the skin, bonding can take place. Remember,
bonding must take place within 25 minutes of the two surfaces being coated.
BONDING
Bring the materials VERY GENTLY together. It is always advisable to position the
materials in exactly the desired position. However, one of the big advantages of Thixofix
is that it has unique "slideability" and does allow you to make small adjustments to
normal sized sheets of laminate, provided that initially both surfaces are "touch dry" and
brought together gently. Then press the two surfaces together with FIRM, even
pressure, ensuring that no area is missed.
When bonding impervious surfaces together, e.g. rigid plastic, metal, etc., a better bond
will be obtained if the two surfaces are thoroughly abraded by using, for example, a
rough emery cloth or wire brush. Both surfaces should then be cleaned before applying
the adhesive.
For edging strips, the same bonding instructions apply, but in the case of very porous
wood simply use one coat of Thixofix as a primer. Wait until "touch dry" and then apply
the main coat of Thixofix and follow normal instructions.
Thixofix will bond strongly, forming a powerful, permanent bond.
PAINTED SURFACES
Thixofix can be successfully used on painted surfaces, but since these can vary greatly
the following test is recommended.
Spread Thixofix onto an unimportant small portion of the painted surface, allow drying for
30 minutes and check to see that the paint has not suffered or shown any signs of
peeling.
Health & Safety
See separate health and safety data sheet.
Storage and Shelf Life
Stored in well sealed containers, Thixofix will keep satisfactorily for up to 24 months,
from date of manufacture.Thixofix must be protected from frost and stored between 5 –
25oC.
Important Notice
Whilst all reasonable care is taken in the compilation of this data sheet, it is the
customer's responsibility to determine the suitability of the product for the desired