eBay

UNIVERSAL CLONING ELECTRIC GATE GARAGE DOOR REMOTE CONTROL KEY FOB 433MHZ CLONER

UNIVERSAL CLONING ELECTRIC GATE GARAGE DOOR REMOTE CONTROL KEY FOB 433MHZ CLONER

Electric Cloning Universal Gate Garage Door Remote Control Fob 433mhz Key Fob

4-Channel RF Wireless Remote Control Duplicator for Cars, Garage Doors, Gate Doors, Alarm Systems etc.

This is a fixed frequency remote cloner (433.92mhz) for copying 99.99% common fixed and learning code remote controls.

Clone up to 4 remote signals from 4 different remotes!

Specifications:

Operating frequency: 433.92MHz

Weight: 30g

Size: 55 x 33 x 15 mm

Remote control range: Up to 100 meter

Battery: 12V/27A (including)

With this replacement remote key, you can clone all 433.92MHz

Duplicate Your Existing Remote Controllers so you always have a backup:

1. Vehicle central locking systems

2. Garage doors

3. Electronic gates

4. Electrical appliances/Home automation i.e. lights

5. Car sunroofs

6. Car/Motorbike alarms

Note:

THIS ITEM IS NOT SUITABLE FOR CLONING ROLLING CODE REMOTES

With this replacement remote key you can clone all 433.92MHz fixed code key fobs based on supported IC

Supported IC CODE: 2260 (ex, PT2260, SC2260, HS2260 LX2260, HX2260, etc); 2262 (ex, PT2262, SC2262, LX2262, HS2262,

HX2262, etc), PT2264, PT2240 (LX2240 LX2241 SCL2240), CS5211, 1527 (EV1527, HS1527, HX1527 SC1527 GP1527 CP1527

AD1527 SCL1527 TL1527 ZX1527), SMC918, AX5026, SMC926, AX5326-3, AX5326-4, FP527, HT600, HT680, HT6207, HT6010,

HT6012, HT6013, HT6014, HT12D, HT46F49E, PIC16F630. The Codes that have the same suffix like SC2262 and PT2262 are also supported

If IC chips cannot match, it will not be copied, please verify the chip model before you buy.

We strongly suggest you check the IC CODE of your original remote key.

The replacement remote key may not work properly if you copy the code from an unsupported IC

Open the back shell of your original remote, to see the IC board

This copy of the remote control cannot copy a computer code and rolling code, the device can only copy fixed code or learn codes

Please replace the battery when the remote control distance is insufficient.

How To Program （So Easy）：

1. Press the two top button A&B until the blue LED flashes - this takes around 3 seconds.

2. Place the cloner remote and the original remote close together/side by side so that they are touching.

3. Simultaneously press a button on your original remote and one of the buttons on the clone remote and hold until the LED on the clone remote flashes steadily. (The Blue LED will first flash 3 times quick, then stops for a second, then flashes steadily for successful cloning).

4. Programming is now successful! If you want to program more buttons simply repeat steps 2-3-4. It's that easy! To reset the remote simply start again with step 1

5. If you still feel hard to program, please youtube some videos on how to pair. Thanks.

Payment

Shipping

Returns

PaymentShippingReturns

We accept payment by any of the following methods:

PayPal

Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner!

We offer FREE shipping on mos orders!

Your order will be dispatched within 1 working day of receiving payment (Monday-Friday)

In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.

If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not.

You can return a product for up to 14 days from the date you purchased it.

Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.

UNIVERSAL CLONING ELECTRIC GATE GARAGE DOOR REMOTE CONTROL KEY FOB 433MHZ CLONER Electric Cloning Universal Gate Garage Door Remote Control Fob 433mhz Key Fob 4-Channel RF Wireless Remote Control Duplicator for Cars, Garage Doors, Gate Doors, Alarm Systems etc. This is a fixed frequency remote cloner (433.92mhz) for copying 99.99% common fixed and learning code remote controls. Clone up to 4 remote signals from 4 different remotes! Specifications: Operating frequency: 433.92MHz Weight: 30g Size: 55 x 33 x 15 mm Remote control range: Up to 100 meter Battery: 12V/27A (including) With this replacement remote key, you can clone all 433.92MHz Duplicate Your Existing Remote Controllers so you always have a backup: 1. Vehicle central locking systems 2. Garage doors 3. Electronic gates 4. Electrical appliances/Home automation i.e. lights 5. Car sunroofs 6. Car/Motorbike alarms Note: THIS ITEM IS NOT SUITABLE FOR CLONING ROLLING CODE REMOTES With this replacement remote key you can clone all 433.92MHz fixed code key fobs based on supported IC Supported IC CODE: 2260 (ex, PT2260, SC2260, HS2260 LX2260, HX2260, etc); 2262 (ex, PT2262, SC2262, LX2262, HS2262, HX2262, etc), PT2264, PT2240 (LX2240 LX2241 SCL2240), CS5211, 1527 (EV1527, HS1527, HX1527 SC1527 GP1527 CP1527 AD1527 SCL1527 TL1527 ZX1527), SMC918, AX5026, SMC926, AX5326-3, AX5326-4, FP527, HT600, HT680, HT6207, HT6010, HT6012, HT6013, HT6014, HT12D, HT46F49E, PIC16F630. The Codes that have the same suffix like SC2262 and PT2262 are also supported If IC chips cannot match, it will not be copied, please verify the chip model before you buy. We strongly suggest you check the IC CODE of your original remote key. The replacement remote key may not work properly if you copy the code from an unsupported IC Open the back shell of your original remote, to see the IC board This copy of the remote control cannot copy a computer code and rolling code, the device can only copy fixed code or learn codes Please replace the battery when the remote control distance is insufficient. How To Program （So Easy）： 1. Press the two top button A&B until the blue LED flashes - this takes around 3 seconds. 2. Place the cloner remote and the original remote close together/side by side so that they are touching. 3. Simultaneously press a button on your original remote and one of the buttons on the clone remote and hold until the LED on the clone remote flashes steadily. (The Blue LED will first flash 3 times quick, then stops for a second, then flashes steadily for successful cloning). 4. Programming is now successful! If you want to program more buttons simply repeat steps 2-3-4. It's that easy! To reset the remote simply start again with step 1 5. If you still feel hard to program, please youtube some videos on how to pair. Thanks.