The fantastic Pro Spray 1500-3 by Apollo / Bambi air compressors UK
At the heart of every Apollo HVLP system is a powerful and efficient turbine delivering High Volume air at Low Pressure. It’s this massive air volume that atomises the paint not the pressure, so the paint stays on the surface and does not bounce back onto surrounding areas nor into the atmosphere. Easy to spray cleanly, efficiently and achieve a fantastic finish with minimal masking off. And because bounce back is reduced you will save paint and help protect the environment too.
Apollo is perfect where space is limited and for on-site spraying, classic cars, shop fitting, decorating, custom kitchen fitters and bath re-enamellers – anywhere needing clean, hassle free spray with a great finish.
with a great finish!
3-Stage Turbine, 1500W, 240V / volts,13A / Amps.
6 Meter Air Hose included as standard.
Weight: 15Kg
C E Marked.
The Pro Spray 1500 Features:
'Non Bleed Gun' means air shuts off when the trigger is released - reduces dust lift
1.3mm Stainless Steel Needle & Jet Assembly - essential with water borne coatings. Smooth, controllable trigger action
Ergonomic, stay cool handle
Adjustable fan pattern from horizontal to vertical & additional spot controller for super fine detail work with a range of nozzles available to order!
Precision Three-stage power atomizes higher viscosity coatings
The correct viscosity of the material is essential to ensure an optimum finish.
Most materials will require thinning before use.
To achieve the correct viscosity, you need
to use the viscosity cup supplied.
Hold your finger over the small hole on the
base of the cup, fill the cup with the material
to be sprayed. Take away your finger and
time the material until it ceases to
VISCOSITY CHART
Type of product Approximate time
Cellulose 18 seconds
Creosote As supplied
Emulsion 27 seconds
Hammer 24 seconds
Gloss Enamel 24 seconds
Polyurethane (Household. 1 pack) 24 seconds
Polyurethane (Industrial. 2 pack) As Instructed
Wood Stain As supplied
Adhesives 17 seconds
Gel Coats 18 seconds
IMPORTANT
INFORMATION ON WARRANTY
The warranty on these units is a RTM meaning to return to manufacturer and not to our offices, please message us for the return address if needed, we have two registered return addresses on our ebay profile and one is Bambi UK, this is the correct return address for this unit.
By sending the unit to Bambi UK directly you will quicken the outcome of the return by about a week, as if you send it to us then we will need to then send it to Bambi after we have processed it.
Please ensure it is returned with all the paperwork it came with otherwise the unit will not be recognised as yours when it arrives at Bambi UK.
Please note that the speed variable one is made to order, this means there can be a 2 week more more delay in the order, I will message you before the order is placed to confirm this, it will be marked as dispatched straight away to keep ebay happy but there will be a delay as parts are ordered special and its made by Bambi uk to order
Payment
We accept payment by any of the following methods:
PayPal and other ebay payment options
Please pay as soon as possible after winning, as that will allow us to post your item to you sooner!
Shipping
Your order will be dispatched within 1 working day of receiving payment (Monday-Friday) and you should expect to receive it one or two days after dispatch.
Returns
Please note that medically contaminated products cannot be returned.
You can return a product for up to 14 days from the date you purchased it.
Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.
The Pro Spray 1500-3
3-Stage Turbine, 1500W, 240 volts,13 amps.
6Mtr Air Hose.
Weight: 15Kg
All units are tested and C E Marked.
The Pro Spray 1500 Features:
'Non Bleed Gun' means air shuts off when the trigger is released - reduces dust lift
1.3mm Stainless Steel Needle & Jet Assembly - essential with water borne coatings.Smooth, controllable trigger action
Ergonomic, stay cool handle
Adjustable fan pattern from horizontal to vertical & additional spot controller for super fine detail work
Precision Three-stage power atomizes higher viscosity coatings
Spray solvent-based materials: enamels, stains, lacquers, polyurethanes, catalyzed finishes, conversion varnishes and linear polyurethanes. The Pro Spray also delivers superb results with water based paints
IMPORTANT INFORMATION ON WARRANTY
It's a return back to factory warranty on these machines so we would need to have a unit back to look at and see if its a manufacturer fault or a user fault,We send our carrier in to collect this from you and inspect to see what the problem is, as we don't just send out replacements with the Apollo range.If it is a user fault we would have to pass the collection charge on to you and charge for the repair, if however its a manufacture fault this will all be fixed / replaced foc
Payment
We accept payment by any of the following methods:
PayPal and other ebay payment options
Please pay as soon as possible after winning, as that will allow us to post your item to you sooner!
Shipping
Your order will be dispatched within 1 working day of receiving payment (Monday-Friday) and you should expect to receive it one or two days after dispatch.
Returns
Please note that medically contaminated products cannot be returned.
You can return a product for up to 14 days from the date you purchased it.
Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.