T2 Boride
NO BLANKS
Grit Kit (6 pcs) Original for Apex EdgePro, TSPROF, Ruixin, KAZAK, Hapstone etc.
Condition is "New". Shipped with USPS First Class.
FeedBaсk
from the previous Buyer: trsm-9147 (4) US$106.36
T2 Boride (NO BLANK) Grit Kit (6 pcs) for Apex Edge Pro, KME,TSPROF, KAZAK, etc (#174610178828)
FeedBaсk
from the previous Buyer: nandrey777 (313) US$91.47
T2 Boride (NO BLANK) Grit Kit (6 pcs) forApex Edge Pro, KME, TSPROF, KAZAK, etc (#174610178828)
FeedBaсk
from the previous Buyer: mexan13 (84) US$106.36
T2 Boride (NO BLANK) Grit Kit (6 pcs) forApex Edge Pro, KME, TSPROF, KAZAK, etc (#174610178828)
FeedBaсk
from the previous Buyer: amtek-a2012(110) US $106.36
T2 Boride (NO BLANK) Grit Kit (6 pcs) forApex Edge Pro, KME, TSPROF, KAZAK, etc (#174610178828)
Boride T2 (NO BLANK) Grit Kit (6 pcs) for Apex Edge Pro, KME,TSPROF, KAZAK, etc -
that mean they come NO mounted-on aluminum blanks (!).
· ForApex Edge Pro, TSPROF, KAZAK, Ruixin, etc. T2 Boride TSPROF Grit Kit (6pcs) -Condition is "New".
Borideis a famous brand on the abrasive market, that offersprofessional sharpening stones of different sizes and materials. Boride canboast various abrasive stones for absolutely any kitchen knife, and theforty-year experience of the manufacturer guarantees that the sharpening andpolishing tools of this brand will extend the life of even the most fastidiousblades for a long time.
· Boride is a famous brand on the abrasive market, thatoffers professional sharpening stones of different sizes and materials. Boridecan boast various abrasive stones for absolutely any kitchen knife, and theforty-year experience of the manufacturer guarantees that the sharpening andpolishing tools of this brand will extend the life of even the most fastidiousblades for a long time.
The blue T2 series is made of aluminum oxide and uses thevery hard bond.
Due to this, it has high performance and a lower-than-average wearrate.
Boride recommends T2 as the best series for working with stainless-steel.
Stone Dimensions: 1/4 × 1 × 6" (3,16 × 25,4 × 152,4 mm)
· Stone’s Grittiness: 150, 220, 320, 600, 800, 1200 Grit
White stains and scratches on the abrasive stones working spaceare allowed. They do not influence abrasive efficiency. Small chips unless onthe working surface are allowed.
Work recommendations: there are no special deviations from thegeneral recommendations and maintenance rules for Boride T2 series stones. Whenyou will be sharpening, you can use both oil-based and water-based coolants.Cleaning the stone from the slums is carried out in the water, using a hardbrush and a soap solution. Stones are leveled on thick glass or mirror withsilicon carbide powder, taking into amount the grain size.
*********************************************
· T2 series stones are made of aluminum oxide and usethe very strong bond. As a result, these stones are high performance, and theirwear rate is below average. Boride recommends T2 at the best series for workingwith stainless steel. The T2 series is the most popular among all Boride seriesfor Edge Pro sharpening. Many customers buy entire sets of the T2 series. T2400 grit is included in Boride stone bundles. If you need it, just call us.
Specification
· Working surface: 6" x 1"x ¼" (152,4 x 25,4 x 6,35 mm)
· Abrasive: Bonded Aluminum Oxide orSilicon Carbide
How to use
Boride stones should be used with one ofthese lubricants:
· Water
· Soapy water
· Boride Bori-Lube
· Water solution of Di propylene glycol
· WD-40 (for experienced users only)
· Refined olive oil (for experienced usersonly)
· Oleic acid (for experienced users only)
In case of using the wateras lubricant, soak the stone in water for 1-2 minutes. In case of using theoil, put a small amount (1-2 drops) of honing oil on the stone’s surface andspread it evenly over the stone with a finger. If the stone absorbs the honingoil, use the larger amount of oil.
Boride Stones may have the followingminor defects:
· Saw strokes on the work surface
· Residues of lacquer
· Small chips at the corners and along theedges (no larger than 1 mm)
All these defects will be eliminated during preparation of the stone.Most sharpening stones requires preparation, and Boride stones are noexception. Additional lapping can be performed by customer to improvesharpening quality. We recommend using loose silicon carbide powder or diamondlapping plate.
FAQ
· What is the difference between theBoride and stock Edge Pro stones?
There is no difference. Edge Pro stonesare the Boride 6" x 1" x ⅛" (152,4 × 25,4 × 3,175 mm) branded as Edge Pro. The Boride'soffers a wide variety of series and sizes, while Edge Pro offers a limitedassortment. We buy sharpening stones DIRECTLY from Boride Corp. and mount thestones to blanks. That's exactly what Edge Pro company does. The difference iswe keep the names of the original sharpening stones in the names of thefinished products.
· Can I use the Boride stones and stockEdge Pro stones simultaneously?
Yes,but you must use a thickness compensator because stock Edge Pro stonesare ⅛" (3,175 mm) thick, while the Boride Corp stones, we offerare ¼" (6,35 mm) thick. It’s highly recommended to own athickness compensator because the ability to use sharpening stones of differentthicknesses allows for a high level of flexibility.
· What if I buy Boride stones ⅛" (3,175 mm) thick (THK - ⅛") to keep all my collection uniform?
No problems, this is possible BUTnot recommended as a long-term solution. The ¼" (6,35mm) thickness (THK) is becoming a sharpening community's standard for EdgePro sharpening stones. If you keep your entire collection ⅛" (3,175mm) thick, you will not be able to use many good stones. You will also have topurchase ⅛" (3,175 mm) stones more often than ¼"(6,35 mm) stones due to their shorter life cycle.
· 5 sharpening stones are too many for me- I'm not the professional sharpener. What should I buy if I want to use it athome?
Consider buying Ruby 150, T2 400 and PC1200. These 3 stones are the best Boride stones for sharpening knives for athome solutions.
· Can I buy CS-HD and use it to sharpenall my knives? If it's okay for hard steel, it should be even better for softsteel, right?
No, we do not recommend this.CS-HD will wear extremely fast when used on soft steel, making CS-HDuneconomical for this kind of steels. If you own knives of both hard and softsteel, consider buying two sets of stones.
· What are the pros and cons of ¼" (6,35 mm) and ⅛" (3,175 mm)
thicknesses for sharpening stones?
All stones wear as they are used,and as a result the thicker stones have longer life cycles. However,it's easier to use thinner stones on Edge Pro sharpeners because of their lowerweight. The ¼" (6,35 mm) thickness offers a perfect balancebetween life cycle and weight and has become the sharpening community'sstandard for Edge Pro format sharpening stones. When made of hardmaterial, ⅛" (3,175 mm) stones are good as ultra-finesharpening stones, for example alumina ceramic or natural stones.
************
*** All buyersoutside of the United States MUST know and WILL be responsible for the exportregulations for cross-border shipment of this category of goods. ***
NEW
Your order will be shipped within 6-8business days from the date of purchase.
Please email anyquestions before bidding.
***
We don't chargeTax.
Ebay may collect salestax based on your state law.
We don't get that taxmoney.
It goes directly toeBay.
***
eBay Feedback:
Feedback will be givenin return for your feedback.
Your satisfaction is importantto us.
If you do not feelcomfortable giving us a 5-star positive feedback rating,
please contactus before leaving any feedback so that we can make things right.
If you would like topurchase this item along with any other items we have listed, we gladly combineshipping.
All items come from asmoke free home. We do our best to describe accurately and honestly everythingwe sell.
If there is a defectthat we are aware of, we will include it in the description the best that wecan.
If you have anyquestions of any item, please e-mail me before bidding.
Thank You– Ъ!