MOLDEX 5000 Series
Pre-assembled ready to use half mask / one size fits all - Serie
CompactMask
5120
- FFA1 P2 R D
5230
– FFA2 P3 R D
5330
– FFABE1 P3 R D
5430
- FFABEK1 P3 R D
The new
Moldex Compact Mask with its integrated filter elements offers respiratory
protection in a shape never seen before. The dimensions have been reduced to a
minimum to offer the smallest possible profile.
The Compact Mask is very lightweight, easy to use and offers unrestricted
freedom of movement. The low profile design offers the excellent field of
vision and can be worn with other safety equipment like face shields, welding
helmets or goggles.
The innovative FlexFit in the nose area provides a secure and comfortable fit.
The mask body is smooth and gentle on the skin and automatically adjusts to
different face shapes and their movements. And there is another advantage: The
FlexFit provides one size fits all.
Features:
Protection Capacity:
The minimum
capacities and breakthrough times of the gas filter cartridges are tested at a
flow rate of 30 l/min.
Category Test Gases |
Minimum Capacity |
Minimum Breakthrough time |
|
A1 |
Cyclohexane |
7.3 g |
70 min |
B1 |
Chlorine |
1.8 g |
20 min |
Hydrogen sulfide |
1.7 g |
40 min |
|
Hydrogen cyanide |
0.84 g |
25 min |
|
E1 |
Sulfur dioxide |
1.6 g |
20 min |
K1 |
Ammonia |
1.05 g |
50 min |
A2 |
Cyclohexane |
18.4 g |
35 min |
Areas
of use:
Class |
WEL* |
Hazard type |
FFA1P2 R D (5120) |
FFA1 10 x |
ORGANIC G ASES/ VAPOURS B.P. > 65°C |
P2 R D 10 x |
HAZARDOUS FINE DUSTS, WATER AND OIL
BASED MISTS/ AEROSOLS, BIOLOGICAL AGENTS OF RISK GROUP 2 |
|
FFA2P3 R D (5230) |
FFA2 10 x |
ORGANIC GASES/ VAPOURS B.P. > 65°C (e.g. As for A1 but at higher concentrations) |
P3 R D 10 x |
HARMFUL AND CARCINOGENIC DUSTS, WATER
AND OIL BASED MISTS/ AEROSOLS, BIOLOGICAL AGENTS OF RISK GROUP 2 AND 3, CMR-SUBSTANCES |
|
FFABE1P3 R D (5330) |
FFABE1 10 x |
ORGANIC GASES/ VAPOURS B.P. > 65°C
INORGANIC G ASES AND VAPOURS ACID GASES |
P3 R D 10 x |
HARMFUL AND CARCINOGENIC DUSTS, WATER AND OIL BASED MISTS/
AEROSOLS, BIOLOGICAL AGENTS OF RISK GROUP 2 AND 3, CMR-SUBSTANCES |
|
FFABEK1P3 R D (5430) |
FFABEK1 10 x |
ORGANIC GASES/ VAPOURS B.P. > 65°C
INORGANIC GASES AND VAPOURS ACID GASES, AMMONIA AND AMINE DERIVATIVES |
P3 R D 10 x |
HARMFUL AND CARCINOGENIC DUSTS, WATER AND OIL BASED MISTS/
AEROSOLS, BIOLOGICAL AGENTS OF RISK GROUP 2 AND 3, CMR-SUBSTANCES |
(WEL = Workplace Exposure Limit)
R: The filters are reusable.
Instruction for fitting:
1. Place the
respirator over the mouth and nose and fit the head straps as shown in the
illustration.
2. Hook up
the bottom straps at the back of the neck.
3. Pull the
ends the straps to the required tightness.
Checking Face Kit:
Close the
vents of the exhalation valve by pressing down the flexible valve cover and
breathe out slowly. If no air escapes between facepiece and face, a proper
sealing fit is achieved. If air escapes, adjust the position of the mask on the
face or adjust the tension of the straps. Repeat this check until a seal is
achieved. If a secure seal cannot be achieved, do not enter any contaminated
area. See your supervisor.
Maintenance of the mask:
The MOLDEX
Compact Mask may be re-used by a single individual wearer or may be employed as
a disposable item. Should you decide to re-use the mask, then it should be
cleaned daily following use. Clean the facepiece with a cloth and warm water in
conjunction, where necessary, with a neutral cleaning agent. Do not allow the
filters to come into contact with the water or cleaning agent. Ensure that the
mask is completely dry before placing in storage.