MAAS KCB-3000 CB radio multinorm with Vox microphone and headset connection

Built-in front speaker with very good loud reproduction.

Due to the very low installation depth, the device fits into every DIN slot and is suitable for surface or sub-construction.

The new MAAS KCB-3000 comes with a voice-controlled Vox microphone, which can be set in several stages in terms of sensitivity and response delay.

In addition, microphone sets with 2 pin. Connect the Kenwood circuit at the front of the device (not included!).

A well-equipped CB radio for cars or trucks, suitable for 12 volt and 24 volt power supplies

The device has a large, illuminated LCD display on which all important information is clearly displayed.

The color of the background lighting can be changed in 7 steps or switched off completely.

Note: In contrast to similar devices on the market, the KCB-3000 has a 6-pin. GDCH connection for microphones, as well as a 2 pin. Socket for speakermikes and microphone sets with "Kenwood" assignment that is really compatible (especially sufficient NF signal)

Switchable multinorm version:

• DE: 80 FM / 40 AM 4 watts
• EC: 40 FM 4 watts
• EI: 40 FM / AM 4 watts
• EU: 40FM 4 watts / 40 AM 4 watts
• PL: 40 FM / AM 4 watts 0kHz
• UK: 40 FM EU 4 watts and 40 FM UK 4 watts

Features and equipment:

• Multichannel device, simply switch over at the national border!
• Power supply 12 or 24 volts DC (can also be operated in older trucks without a converter)
• large LC display with 7 possible color settings, dimmable
• Automatic or manually adjustable squelch
• Key lock (Lock)
• ANL interference suppression integrated
• Channel 9/19 switch
• Vox function for voice-controlled sending internal / external
• Channel search (scan)
• Up / Down buttons for channel selection
• Squelch and volume controls
• Microphone with integrated channel selection buttons and Vox functionality
• Connections for antenna, external loudspeaker and microphone sets (Kenwood standard) are available
• Connection for microphone sets and speakermikes (Kenwood standard: 2.5 mm jack socket for loudspeaker - 3.5 mm microphone / PTT)
• Detachable power cable
• Dimensions 189 x 74 x 57mm (W x D x H)
• Weight approx. 630 grams

Scope of delivery:

• Radio
• Bracket holder with knurled screws for normal assembly
• DIN mounting brackets
• Power connection cable with cigarette lighter plug
• Power connection cable with open ends for permanent installation
• Vox microphone 6-pin (GDCH standard) with channel selection buttons
• Operating instructions German / English
• EAN code 4250158721272
• Weight: 0.75 kg