2.13” E-Paper E-ink Screen Kit für RPI Raspberry Pi Zero 2 W WH 3 Model B Plus 4

PACKAGE CONTENT ：(  NOT include Raspberry Pi board.)

Dies ist die V4-Version,
Bitte verwenden Sie die V4-Version der Bibliotheksdatei!

  1. 2.13inch e-Paper HAT x1  （ V4 version）

  2. RPi screws pack  x1

  3. 20cm 8Pin Cable  x1

123
 

Wiki English manual : www.waveshare.com/wiki/2.13inch_e-Paper_HAT

Installieren Sie zur Verwendung mit Ihrem Raspberry Pi-Projekt die folgenden Bibliotheksdateien: epd_2in13_V3_test.py.
Das E-Paper-Modul wird über eine Bibliotheksdatei (Beispielcode) gesteuert. Bitte installieren Sie vor der Verwendung die richtige Bibliotheksdatei.
Wenn Sie es nicht installieren, startet der Bildschirm möglicherweise nicht.
Benötigen Sie technischen Support, kontaktieren Sie mich bitte.

 

This is an E-Ink display HAT for Raspberry Pi, 2.13inch, 250x122 resolution, with embedded controller, communicating via SPI interface, supports partial refresh.

Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.

Features

  • No backlight, keeps displaying last content for a long time even when power down

  • Ultra low power consumption, basically power is only required for refreshing

  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano

  • SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc.

  • Onboard voltage translator, compatible with 3.3V/5V MCUs

  • Wiki English manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)

  • Wiki English manual :    www.waveshare.com/wiki/2.13inch_e-Paper_HAT

Specifications

  • Operating voltage: 3.3V/5V

  • Interface: SPI

  • Outline dimension: 65mm × 30.2mm

  • Display size: 23.71mm × 48.55mm

  • Dot pitch: 0.194 × 0.194

  • Resolution: 250 × 122

  • Display color: black, white

  • Grey level: 2

  • Partial refresh time: 0.3s

  • Full refresh time: 2s

  • Refresh power: 26.4mW(typ.)

  • Standby power: <0.017mW

  • Viewing angle: >170°

Interface

SYMBOL

DESCRIPTION

VCC

3.3V/5V

GND

Ground

NC

NC

DIN

SPI MOSI pin

CLK

SPI SCK pin

CS

SPI chip selection, low active

DC

Data/Command selection (high for data, low for command)

RST

External reset, low active

BUSY

Busy status output, high active

Dimensions

Development Resources

Wiki :  waveshare.com/wiki/2.13inch_e-Paper_HAT

 

 
It takes 12-20 working days to arrive most European countries using standard shipping.
Some European island countries, overseas territories and South American countries need to arrive in 25-35 working days.
 
For urgent parcel, you can email us and choose Fedex, DHL, UPS, EMS etc., but you need to pay extra fee.
If you need to use the express delivery service, please contact me via eBay mail.
We absolutely stand behind our products. All of our items will be checked and tested before shipment to ensure 100% performance.
 
We also offer 15 day money back guarantee if you are unsatisfied for any reason whatsoever. We will refund the entire cost of the item not including the shipping and insurance charges. Our aim is 100% customer satisfaction!
 
If you are unclear about product usage, please feel free to contact us. We will offer your detailed instructions for use.
PushAuction