4-20MA to RS485 2 Channel DC12V 0-25MA Analog 12Bit ADC Board Modbus RTU PLC NEW
Product Name: 4-20MA to RS485 2 Channel DC 12V 0-25MA Analog acquisition module 12Bit ADC Board Modbus RTU PLC
 
 
Package inlcuded:
  1 x N46IB02 12V 24V 2 Channel 4-20MA/0-25MA Current analog acquisition Modbus RS485 module
 
Description:
 
1: Operating Voltage : DC 8-25V(DC 9V 12V 15V 24V)
2: Operating Current : 8-13MA

3: MODBUS RTU Command support 03 06 function code
4: IN1/IN2 channel current measurement range is 0-25MA(for 0-20MA/4-20MA)
5: Current resolution is 0.1MA, measurement accuracy is 1%; if the error is greater than 1%, it can be calibrated
6 :MODBUS commands can be made serial HyperTerminal (serial assistant) OR PLC Enter;
7 :Under the MODBUS command mode, it can support up to 247 devices in parallel

8 :Size: 30 * 15 * 4.3mm(no PIN)
9 :Weight: 1.7g(no PIN),2.2g(with PIN)
 
Instruction manual Please ask us after the purchase
 
Application
4-20MA/0-20MA Sensor
0-25MA Current analog acquisition
Automated industry PLC
Smart Home,Home Automation ;
Identification system;
RS485 Remote monitoring;
Multimeter voltmeter
Configuration Software

Slave ID: Different ''Sliver ID'' can be set by command, the maximum number is 247
Under the MODBUS command mode,the slave ID must be correct
Command Description, Please refer to '' N4AIA04 modbus rtu protocol ''
 

  • If you can't receive the product within 2 months (60 days), please contact with us,we promise to payback 100% of your money.
    We ensure our products work normally before post.If the products is broken before arrival to you,all you should do is taking a photo to show us our broken product.We promise to payback 100% of your money.

  • If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
  • If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.

* When you satisfied with our product and services please leave us positive feedback.

* If you have got the package, please confirm "Delivery on time" For us.

* If a problem occurs, contact us immediately with any email request.

* Just contact us using the " Ask the seller a question" link on eBay.

1. We only ship to the confirmed address provided by eBay. please make sure your ebay address is 100% matches the address you would like us to ship to. If not, please let us know before we sent you the package, or we will not be responsible for any loss. hope you could understand.
2. Orders will be processed instantly and dispatched within 1-3 business days except hoilday, so we do NOT accept any email/message note after you place orders.

  • EBAY Managed Payment. But we only Accept your Ebay Address, please Make sure it's 100% right.
    Payment must be received in 5 business days of auction closing.
    Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
    Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.

Le 02-sept.-21 à 05:29:13 Paris, le vendeur a ajouté les informations suivantes :

DataCaciques