PACKAGE CONTENT : ( NOT include Raspberry Pi board.)
SIM7600G-H 4G HAT (B) x1
LTE Antenna x1
GPS Antenna x1
USB Cable x1
Screws pack x1
Enabling LTE Cat-4 4G / 3G / 2G Communication & GNSS Positioning
Based on SIM7600G-H, Global Band
Dedicated pogo pin for Raspberry Pi Zero/Zero W
MicroUSB connector for other Raspberry Pi boards or PC
Incorporates SIM7600G-H global band 4G module, compatible with 2G/3G/4G network with global support
USB HUB connector for other Raspberry Pi boards or PC, providing USB extension and 4G network access
Supports dial-up, telephone call, SMS, TCP, UDP, DTMF, HTTP, FTP, etc.
Supports GPS, BeiDou, Glonass, LBS base station positioning
SIM card slot, supports 1.8V/3V SIM card
Onboard audio jack and audio decoder for making telephone call
2x LED indicators, easy to monitor the operating status
Control via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set)
Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT
Wiki English manual (examples for Raspberry Pi)
FREQUENCY BAND | |
LTE Cat-4 | LTE-FDD: B1/B2/B3/B4/B5/B7/B8/B12/B13/B18/B19/B20/B25/B26/B28/B66 |
3G | UMTS/HSDPA/HSPA+: B1/B2/B4/B5/B6/B8/B19 |
2G | GSM/GPRS/EDGE: 850/900/1800/1900 MHz |
GNSS | |
Satellite systems | GPS/Beidou/GLONASS |
Receiver type | 16-channel |
C/A Code | |
Sensitivity | -159 dBm (GPS) / -158 dBm (GLONASS) / TBD (BeiDou) |
Cold starts: -148 dBm | |
Time-To-First-Fix (open air) | Cold starts: <35s |
Hot starts: <1s | |
SMS AND AUDIO | |
SMS | Supported types: MT, MO, CB, Text, PDU |
Audio feature | Supports echo cancellation |
Supports noise reduction | |
OTHER | |
Power supply | 5V |
Operating temperature | -30°C ~ 80°C |
Storage temperature | -45°C ~ 90°C |
Dimensions | 65.00 × 31.00mm |
Dedicated Pogo Pin For Connecting With Raspberry Pi Zero/Zero W Without Extra USB Cable
General Purpose MicroUSB Connector For Other Raspberry Pi Boards Or PC
Up To 50Mbps Uplink And 150Mbps Downlink For 4G Network *
* stands for idealized data rate, the actual data rate depends on factors like network coverage, traffic congestion, base station condition, etc.
Onboard USB HUB Chip With USB2.0/1.1 Compliant,
Providing 2x USB-A Connector And 1x USB Solder Pad
Supports GPS, BeiDou, Glonass, LBS Base Station Positioning
Making Telephoto Call Or Sending SMS By AT Commands, With Onboard Audio Jack
SIM7600G-H
FE1.1S USB HUB chip
NAU8810 audio decoder
MP1482 power chip
RT9193-33 voltage translator
USB HUB input
D+/D- pogo pin: for Raspberry Pi Zero/Zero W
MicroUSB connector: for other Raspberry Pi boards or PC
Pogo pin power supply
5V: connects to 5V pin of Zero/Zero W, up to 2A current
GND: connects to GND pin of Zero/Zero W
USB extended ports
USB1~USB2: USB-A connectors
USB3: solder pad
SIM card slot
supports 1.8V/3V SIM card
3.5mm earphone/mic jack
MAIN antenna connector
AUX auxiliary antenna connector
GNSS antenna connector
Power indicator
Network status indicator