Item Descriptions:

Wireless switch mainly used in lighting,LED,Fans.computer, electric doors, windows, lifting equipment, motor control, pumps, lifts control and security industry and other fields.Wireless switch Relay can Simplified circuit.Especial in home LED light fan,very convenient for Home electronics voltage 9V-85V，More convenient wiring combination.

Description:
 Transmitter Control
Channel: 1 CH
Control Distance: Long distance control ,the RF Remote control Signal 50M,in open area ( If the obstacle can control about 0-30M, like Signal through wall or building,can not through the hill or oversize building )
Encode: Fixed code, soldering
Frequency:433 MHz
Power Supply:  2*2016 battery (6V)
Specification:
Working Voltage: AC/DC 9V-85V,9V-48V,49V-85V 30A
Working Frequency: 433MHz
Max Current: 30A
Contact Capacity: 30A/250VAC; 30A/30VDC
Operating Temperature: -40'C~+80'C
Output State:   Momentary/Toggle/Latched adjusted freely by the Jumper on the receiver.
Size: 65*37*17mm(PCB Board ,not included the cover)
Size with Cover: 5.6X4.2X3 CM
Receiver Sensitivity:  -105dBm
Code: Learning code

Working ways:
Toggle/Self-Lock: Press->On; Press again->Off
press one button for one time is working/ON .press the same button again is stop/OFF.(1 channel switch(receiver) need 1 button remote control (transmitter).
Latched/Inter-Lock: Press->On; Press other button->Off
press one button is working/ON, press another button is stop/OFF.(1 channel switch(receiver) need 2 buttons remote control (transmitter).
Momentary/Jog: Press and hold->On; Release->Off
Keep pressing one button is working /ON. loosen your finger is stop/OFF. 1 channel switch(receiver) need 1 button remote control (transmitter).
 The work model can free change in mode pin(self lock default set)
Learn code and Remove Code
1. Learn: Press the learning code, the indicator from on to off, loosen your finger, press any button of the remote control, the indicator flash 2 times and off.  It means you learn it successfully.
2. Remove: Press the learning button about 8 seconds, the indicator turn on to off, it means the Code had been removed successfully.
Package:
2X Remote Control transmitter (Battery included)
1X 9V-85V receivers Switch (With cover)