BSP 1/8"-1" Male to Female Thread Coupler Reducer Brass Fitting Pneumatic Pipe
Product Description:
  • ※ Material: brass
  • ※ Color: yellow (silver is the color after plating)
  • ※ Size: see drop down list
  • ※ Properties: Brass has the advantage that it is not easy to rust, corrosion-resistant, easily conducts heat and has strong electrical conductivity, high temperature resistance, high pressure resistance, explosion protection, etc.

     
    Inch, DN, nominal comparison table
    InchDNNominal outside diameter (mm)
    1/8"DN6φ9.5
    1/4"DN8φ13.5
    3/8"DN10φ16.5
    1/2"DN15φ20
    3/4"DN20φ25
    1"DN25φ32
    1 1/4"DN32φ40
    1 1/2"DN40φ50
    2"DN50φ63
    2.5"DN65φ75
    3"DN80φ90
    4"DN100φ110

     
    ※ Product launch related to pipe fittings:
    1. Nipple: Used to connect two fittings and is most commonly used in plumbing solutions.
    2. Reducer: If you want to connect two pipes with different widths, use a reducer in this case.
    3. Angle: This changes the direction of the pipe by 45 ° or 90 °.
    4. Cross: As the name suggests, this component has a cross shape with four branches in opposite directions. One of the four crosses serves as an entrance, while the remaining three branches serve as an exit.
    5. Connection: The pipeline must be disconnected during maintenance, fastening or replacement. A joint is a component that is used to disconnect the pipe when it is necessary for the above purpose.
    ※ Important note: Even if you want to order more varieties from this offer, all selection fields must first be set to "Select" before making a selection!
     
    ※If you intend to buy several or different items, it is best to use the "Add to cart" function and do not complete the purchase until you have completely selected all the items and variants that you need in total.
    In the same way, shipping costs are automatically calculated only once, regardless of what or how much you buy.(Except for special products with other requirements)

    Dimensional error information:When manufacturing parts, to make them interchangeable, the parts should be within the specified maximum and minimum limits. The permissible size variation is: tolerance, but they all fall within the scope of the industry regulations. Contact online customer service for information on specific tolerances. When the product is ordered, the tolerance is accepted by default.
     



    Package Include:
    • According to your Choose!
    Payment:
    • Paypal only
    Delivery details:
    • We only accept your Ebay Address,Please Make sure it's 100% right.
    • The items you ordered will be shipped out in 2 business day by Air Mail when your payment is clear.
    Terms of sales：
    • If you are not satisfied with the item, please contact with us.
    • We will offer Full Refund to you when we receive your returned item.
    • Any problem, please feel free to contact with us.
    About us:
    • If you are satisfied with the products,I expect you can leave us a positive feedback.
    • If you have any problem or be not satisfied with them,please feel free to contact us,we will reply you within 24 hours.
    Contact us: 
    • We care about our valued buyers, if you have any questions, our Customer Service staffs will be very glad to help you. We try our best to reply to your emails as soon as possible, however, due to high volume of daily incoming emails and time zone difference, we may not be able to reply your emails immediately. Please allow 24 business hours for us to response.
    • About item:For the functional products in our shop, we make sure that the functions are the same as description, but the actual color and shape may looks a little different from pictures because of the technical improvement and manufacturing variance. Please be advised before you bid.
    Dear friend，
    Welcome to my store. Thank you give us chance to service for you.
    our work time 8:30am-17:30pm (Beijing Time).when we got your message that we will reply you ASAP
    Product is on sale, you can get coupons and place order normally. 
    We will ship to you as soon as possible. And due to many factors, flights have been reduced, causing international logistics delays.we realy hope you can understand that-
    But please don't worry, if you have the questions about the order, please contact with us at first We will help you to solve it.We are always with you!
    When manufacturing parts, in order to make the parts interchangeable, they should be within the specified maximum size and minimum limit size. The allowable size variation is called: tolerance, screws generally have positive and negative tolerances, specific tolerances The value varies according to the classification of the screw, but they are all within the range specified by the industry. Please consult the online customer service for specific tolerances. If the product is ordered, it is deemed to accept this tolerance by default.
    1. At the top of the eBay listing, from top to bottom, first select the design, and then select option 1 and option 2 or option 3 of the product....More options.
    2. Then, if you select the corresponding number under "Quantity", you can purchase the selected goods as many times as you need.
    Important note: Even if you want to order more varieties from this link, you must first set all selection fields to "select".
    3. Do not pay separately.
    If you plan to purchase multiple or different items, it is best to use the "Add to Cart" function until you have completely selected all the items and sizes you need before completing the purchase.
    In the same way, no matter what you buy or how much you buy, the transportation cost will only be automatically calculated once (the logistics charge of some products may be different, and the details are subject to the interface display. If you are not sure, contact customer service in time).
     
    PushAuction

    DataCaciques